The objective of this research is to develop a simple analytical method that characterizes plane shock wave propagation through reinforced earth and the dynamic interaction with modular retaining wall panels. The shock wave was initiated as a velocity boundary condition. The exact solution was obtained by the Laplace transform method. A step-by-step design procedure based on the "limit state" c...

Construction of railway embankments on loose beds without using any methods of soil improvement (e.g. stone columns in silt and clay beds, deep soil mixing method, jet grouting and also using micropiles individually or in groups form) leads to  reduction of embankment slope gradient, which significantly increases the volume of soil operation. Generally, micropile as a reinforcing element with t...

ABSTRACT: This paper presents the settlement analysis of a beam resting on geosynthetic reinforced granular fill-soft soil system. Each subsystem of the reinforced fill-soil system is idealized by elastic membrane, Pasternak shear layer, Winkler springs and dashpots, as applicable. The suggested model incorporates various aspects of the behavior of the geosynthetic-reinforced granular fill-soft...

This paper tries to study the effect of geosynthetic inclusion on the improvement of the load-settlement characters of two layered soil. In addition, the effect of geogrid and geotextile in reduction of the required thickness of subbase layer in unpaved roads is studied. Considering the vast application of bearing ratio tests in road construction projects, this test is used in present investiga...

this paper presents a simplified approach to estimate the resultant force, which should be provided by a retention system, for the equilibrium of unstable slopes. the results were obtained with a developed algorithm, based on limit equilibrium analyses, that assumes a two-part wedge failure mechanism. design charts to obtain equivalent earth pressure coefficients are presented. based on the res...

In order to design civil structures that are supported by soils, the shear strength parameters of soils are required. Due to the large particle size of coarse-grained soils, large direct shear tests should be performed. In this study, large direct shear tests on three types of coarse grained soils (4.5 mm, 7.9 mm, and 15.9 mm) were performed to evaluate the effects of particle size on the shear...

Strengthening of existing circular reinforced concrete columns by CFRP confinement

The increase of shear strength in soil, reinforced with the geogrid (alternate reinforcer), is resulted from an increase of modulus of soil hardness, and also from the tensile strength of reinnforcer. The shear strength of contact surface in soil appears due to both the friction strength against the contact surface, and the passive strength formed in front of the elements of the geogri...

In this paper a laboratory study has been carried out on the effect of changing the type of soil filling cylindrical reinforcing elements from SM to GM on behavior of sandy soil. In this study the primary tests for evaluation of the impact of reinforced sand and gravel columns with diameters of 5 cm and heights of 15 cm subjected to vertical stresses of 50, 100, and 150 KPa were carried out in ...

Disposal of an industrial waste like flyash produced from burning of coals in thermal power stations requires a large land area. The decreasing availability of good construction site has led to the increased use of low lying areas filled up with industrial wastes whose bearing capacity is low. In-situ treatment of such industrial waste fills; in order to improve their bearing capacity with rein...