Introduction: Fluoride (F) and its compounds are widely used in industries in which fluoride overdose leads to various detrimental diseases. In this study the effect of NaOH-modified Eucalyptus leaves on fluoride removal from aqueous solutions as a natural adsorbent was investigated. Materials and Methods: The focus of this study was on the effects of parameters such as pH (2-12), initial conc...

Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was performed by response surface modelingwith the help of Minitab 16 software. The effect of independent ...

Porous zirconium alginate beads as a novel adsorbent were prepared for fluoride removal and characterized by SEM, FTIR, TG, EDX and XPS. The effect of solution pH, adsorbent dose, initial fluoride concentration, contact time, medium temperature and the coexisting ions on adsorption capacity of fluoride ion has been studied. The presence of HCO3 , SO4 2and PO4 3had a large negative impact on flu...

Introduction: A high concentration of fluoride causes health problems in man. How to remove excess fluoride from water is the objective of this project. The study focuses on an evaluation of the performance of activated bauxite mines in Yazd province in order to remove fluoride from drinking water. Materials and Methods: This study was an experimental one and conducted on synthetic samples a...

besides human dental and skeletal fluorosis, drinking water above permissible levels of fluoride is known to cause a wide range of adverse health effects. in this study, the adsorption of fluoride from aqueous solution onto pretreated zeolite has been studied by using batch test. the large surface area of natural zeolite (i. e., clinoptilolite from miyaneh region, iran) was utilized to create a...

Fluoride is a persistent and non-biodegradable pollutant that accumulates in soil, plants, wildlife and in human beings. Therefore, knowledge of its removal, using best technique with optimum efficiency is needed. The present survey highlights on efficacy of different materials for the removal of fluoride from water. The most important results of extensive studies on various key factors (pH, ag...

Removal of fluoride ions was investigated using a new adsorbent of yttrium alginate biocomposite (YALG). Effect of various parameters such as pH, contact time, initial concentration of fluoride ions and temperature on the sorption capacity of adsorbent was studied. Performing a mathematical assessment of fluoride sorption, isotherm and kinetics models including Freundlich & Langmuir isotherms a...

Several methods are available to remove fluoride from the aqueous environment but they are not feasible in all places and conditions due to various reasons. In the present work, F(-) has been removed by using activated and ordinary quick lime. The removal of fluoride was 80.6% and the final concentration was 9.7 mg/L at optimum condition from the synthetic solution having initial fluoride conce...

Adsorption is one important technique in fluoride removal from aqueous solutions. The viability of adsorption techniques is greatly dependent on the development of adsorptive materials. A large number of materials have been tested at a fluoride concentration greater than 2 mg/l, and the lowest limit for fluoride reduction by them is about 2 mg/l. Decreasing the fluoride concentration to less th...

This work investigated fluoride removal of municipal potable water by electrocoagulation using response surface methodology that was applied in the development of statistical analyzing, modeling and interpreting the resulted treatment data. In addition the response, residual, probability, surface and contour plots were achieved. Fractional factorial design has been applied for the simultaneous ...