Abstract This paper introduces the resonant condition of LC parallel circuit and under ideal condition. Through combination calculation simulation, analysis actual circuit, which makes waveform sine is affected, distortion parameters. Combined with full-response sinusoidal excitation source same frequency, parameters that affect optimal state when at a fixed frequency are derived. Finally, abov...

Switched reluctance motor (SRM) drive has a remarkable characteristic, high efficiency, and good controllability, which makes it attractive for high-speed applications. In this paper, the basic control strategy for a switched reluctance motor drive circuit is explained and then three different resonant discharge topologies for SRM drive circuit are proposed. Due to resonantly discharging of exc...

3.3kV high speed IGBT module was developed. Optimized lifetime control realized drastically decreasing of both of turn off loss and recovery loss. This high speed characteristic is suitable for bi-directional and medium frequency application such as resonant DC/DC converter. IGBT switching and diode reverse recovery behaviour at resonant DC/DC converter modelled circuit were demonstrated. Obvio...

This paper presents the operational modes and the design of the active clamp flyback inverter. The auxiliary switch, clamp capacitor (Cclamp) and resonant inductor (Lr) are used in flyback inverter to minimize the spike voltage at the transformer primary side. Therefore, the voltage stress of main switch can be decreased. The active clamp circuit can also help the main switch in order to achiev...

Nine sets of laboratory exercises are designed to acquaint the student with many aspects of NMR/MRI probe resonant circuits. These include demonstrations of stray inductance and capacitance, matching a resonant circuit to 50 V, inductive coupling, doubly resonant circuits, loading effects of tissue, and radiation from the probe circuit. Many of the exercises are for the bench, but some are perf...

QCM interactions with a discretely resonant load much greater in frequency than the quartz resonator’s shows negative frequency changes with increasing mass loading. However, a positive frequency increase of the coupled system occurs when the load resonant frequency is less than the quartz resonator’s. A brief review of the method by which a resonant load can be coupled into the electromechanic...

A third order harmonic oscillator has been proposed based on the resonant tunneling diode pair oscillators. This oscillator has significant advantages, good stability of the oscillation frequency against the load impedance change together with capability to output higher frequencies. Proper circuit operation has been demonstrated using circuit simulations. It has been also shown that the output...

Because the choice of oscillator resonant circuit parameters depends mostly on experience, we propose nonlinear differential equations to describe an oscillator based on an equivalent circuit of the oscillator and then to describe the internal electrical noise of the oscillator by introducing a stochastic term that establishes a nonlinear stochastic differential equation to analyse the oscillat...

Excessive vibration of turbomachinery blades causes high cycle fatigue (HCF) problems requiring damping treatments to mitigate vibration levels. Based on the technical challenges and requirements learned from previous turbomachinery blade research, a feasibility study of resonant damping control using shunted piezoelectric patches with passive and active control techniques has been conducted on...

This study presents a two-switch continuous conduction mode pulse width modulation flyback converter that employs an LC snubber circuit. The snubber circuit is used to achieve zero voltage switching (ZVS) operation for the main switches during the turn-off transition and soft switching for power diodes. With the proposed LC snubber, the magnetic energy in the transformer leakage inductance can ...