Abstract Explosion yield estimation based on seismic data (ground motion in the near field) is one common approach to estimate near-surface explosion yield. The models of different site media are usually established through chemical experiments. However, current experiments mainly soil and hard rock, lacking experiment model soil-rock-mixture site. To solve above problem, motion) at depths were...

A comprehensive investigation was carried out to minimize the cost price of the rock fragmentation process including: drilling, blasting, secondary blasting and separating the large boulders (oversize rocks) while loading, until the optimized fragmentation, powder factor and ratio of burden (B) to blasthole diameter (?h) were achieved by doing several stages of drilling and blasting practically...

Most empirical and numerical approaches to design in rock mechanics incorporate rock mass classification. Numerical design methods generally use classification values to calculate input parameters for stress-based failure criteria. Empirical methods use classification to allow comparisons between similar rock mass conditions, generally based on a graphical design technique that differentiates s...

This paper deals with the statistical analysis of the uniaxial compressive strength and of the elastic modulus of jointed rock masses under different confining pressures. Properties of the rock masses with different joint fabric, with and without gouge have been considered in the analysis. A large amount of experimental data of jointed rock masses from the literature has been compiled and used ...

This research work presents a case study of rock mass characterization on diversion tunnels at Diamer Basha Dam, Pakistan. Geological and geotechnical studies were performed to characterize the rock mass along the axis of diversion tunnel. The core specimens retrieved were tested in laboratory and physical and mechanical properties of the rock mass were determined. Detailed discontinuity survey...

A thin coal seam mined as a protective coal seam above a gas outburst coal seam plays a central role in decreasing the degree of stress placed on a protected seam, thus increasing gas permeability levels and desorption capacities to dramatically eliminate gas outburst risk for the protected seam. However, when multiple layers of coal seams are present, stress-relieved gas from adjacent coal sea...

The Mine Safety and Health Administration (MSHA) specification for rock dust used in underground coal mines, as defined by 30 CFR 75.2, requires 70% of the material to pass through a 200 mesh sieve (<75 µm). However, in a collection of rock dusts, 47% were found to not meet the criteria. Upon further investigation, it was determined that some of the samples did meet the specification, but were ...