Starting materials used were 99.8% pure nickel, 99.9% pure iron, 99.9% pure tantalum, and 99.9% pure molybdenum. The materials in a total weight of 500g were melted with a high-frequency induction furnace in vacuum. The melt was poured into an iron mold with an opening of 20mm diameter and 150mm length. After forging, the ingot was reduced to a thin plate 0.3mm in thickness by rolling and a wir...

We investigate the lower limit of nanowire diameters stably produced by the process of thermal fiber drawing and fiber tapering. A centimeter-scale macroscopic cylindrical preform containing the nanowire material in the core encased in a polymer scaffold cladding is thermally drawn in the viscous state to a fiber. By cascading several iterations of the process, continuous reduction of the diame...

A rectangular rod is placed in a flow field flowing parallel to a flat plate. Effect of chord-thickness ratio of rectangular rod on developing vortex shedding downstream to the rod is studied. Then, for each one of the aspect ratios, the distance of the rod from the neighboring flat plate is reduced until the rod sticks to the flat plate. In each case, the effect of the flat plate boundary laye...

A die angle is one of the most important parameters for a drawing process. It should be chosen in that way that a draw stress is low, a wire surface quality is satisfactory and die durability is high [1]. The temperature of a wire in deformation zone depends on amounts of heat generated during a drawing. This heat consists of two components; one is the work piece deformation and another is fric...

abstract   background: pseudoarthrosis of the tibia poses one of the most challenging treatment problems in all of orthopedics. the goal of the study was to assess the clinical outcome of intramedullary rod fixation in its treatment.   methods: the results of the management for nine patients with pseudoarthrosis of the tibia with im rod fixation were reviewed retrospectively between 1986 - 2006...

All-solid microstructured optical fibers (MOF) allow the realization of very flexible optical waveguide designs. They are prepared by stacking of doped silica rods or canes in complex arrangements. Typical dopants in silica matrices are germanium and phosphorus to increase the refractive index (RI), or boron and fluorine to decrease the RI. However, the direct interface contact of stacking elem...