a 25-year-old man was admitted in hospital due to right side hemopneumothorax secondary to car accident. a chest tube was inserted. during the hospitalization days, chest ct scan revealed a 3cmx3 cm oval-shaped density located in the right upper lobe. since he was in a good general condition, he was discharged from hospital after removal of chest tube and a follow-up chest ct-scan was recommend...

OBJECTIVE Conventional, separate mediastinal and pleural tubes are often inefficient at draining thoracic effusions. DESCRIPTION We developed a Y-shaped chest tube with split ends that divide within the thoracic cavity, permitting separate intrathoracic placement and requiring a single exit port. In this study, thoracic drainage by the split drain vs. that of separate drains was tested. MET...

Anisotropic dielectric relaxations in several binary nematic mixtures of MBBA and non-mesogenic compound oriented by magnetic field were measured in the frequency range of 300 Hz to 3 MHz. Viscosity measurements were also made in the isotropic state. Non-mesogenic compounds used were non-linear shaped molecules such as chloroform, m-xylene, and 1,3,5-trimethylbenzene, and nearly linear shaped m...

BACKGROUND Cannula shape and connection style influence the risk of thrombus formation in the blood pump by varying the blood flow characteristics inside the pump. Inlet cannulas should be designed based on the need for anatomical fit and reducing the risk of thrombus generation in the blood pump. The effects on thrombus formation of the cone-shaped bend inlet cannulas of axial blood pumps shou...

This paper illustrates the mechanism of U-shaped vortex formation which is found both by experiment and DNS. The main goal of this paper is to explain how the U-shaped vortex is formed and further develops. According to the results obtained by our direct numerical simulation with high order accuracy, the U-shaped vortex is part of the coherent vortex structure and is actually the tertiary strea...

Latent heat storage technology is widely used in solar power generation. Aiming to enhance the energy utilization rate a greater extent, an innovative fan-shaped structure has been proposed construct metal fins of shell-and-tube thermal device. The enthalpy method simulate process and focuses on influence inlet conditions transfer. fin melting properties phase change material studied. results s...

An experimental investigation was carried out to study mixed convection heat transfer from Al2O3-water nanofluid inside a vertical, W-shaped, copper-tube with uniform wall temperature. The tests covered different ranges of some involved parameters including Reynolds number, temperature and particles volume fraction. The results showed that the rate of heat transfer coefficient improved with Rey...

INTRODUCTION The Shiley™ Flexible adult tracheostomy tube with TaperGuard™ cuff has been designed through its geometry, materials, diameter, and wall thickness to minimize micro-aspiration of fluids past the cuff and to provide an effective air seal in the trachea while also minimizing the risk of excessive contact pressure on the tracheal mucosa. The cuff also has a deflated profile that may a...

In order to be able to provide valuable data in multiparameter measurement field operations, tiltmeters need to have a noise level better or equal than 10(-9) rad for a period range from a few minutes to a few years and a long term stability ranging from 10(-7) to 10(-8) rad/yr. Tiltmeter measurements should also be as much as possible insensitive to thermal disturbances, by taking great care o...