the fabrication of complex-shaped parts out of (wt %) co-28cr-6mo alloy by three-dimensional printing (3dp) was studied using two grades of the alloy with average particle sizes of 20 and 75 μm. to produce sound specimens, 3dp processing parameters were tuned. the sintering behavior of the powders was characterized by the dilatometric analysis. batch sintering in argon atmosphere at 1280 °c for...

The microstructure evolution of Fe-17 wt. % Cr-12 wt. % Ni-2 wt. % Mo stainless steel fiber felts during the fast sintering process was investigated by the synchrotron radiation X-ray computed tomography technique. The equation of dynamics of stable inter-fiber neck growth was established for the first time based on the geometry model of sintering joints of two fibers and Kucsynski’s two-sphere...

In this study; iron based powder metal (PM) bushing compacts were sintered via medium frequency induction heating system. Iron based powders were mixed with 2 wt.% copper (Cu), 0.3 wt.% carbon (C) and 1 wt.% zinc stearat (Zn-st) via V-Type mixer. PM compacts were sintered by 2 different sintering processes. One of them was conventional sintering method other was medium frequency induction sinte...

Flash sintering is one of the newest techniques for sintering ceramics to near full density. It occurs in an appropriate combination of temperature and electric field. Temperature measurement is one of the most serious challenges in this process. In the present study, we tried to model a flash sintering process of 8YSZ and 3YSZ with finite element method to make an assessment for temperature di...

A new ultra-rapid process of flash spark plasma sintering is developed. The idea of flash spark plasma sintering (or flash hot pressing - FHP) stems from the conducted theoretical analysis of the role of thermal runaway phenomena for material processing by flash sintering. The major purpose of the present study is to theoretically analyze the thermal runaway nature of flash sintering and to exp...

We present fast sintering for silver (Ag) nanoparticle (NP) and flake layers printed using roll-to-roll (R2R) gravure printing. An infrared (IR) sintering module was applied to an R2R system to shorten the sintering duration of an R2R gravure-printed Ag layer. IR sintering of the conductive layer was improved by optimising the process condition. After printing of the Ag NP and Ag flake layers, ...

STATEMENT OF PROBLEM The fabrication of zirconium dioxide (ZrO2) dental prosthetic substructures requires an extended sintering process (8 to 10 hours) in a conventional oven. Microwave sintering is a shorter process (2 hours) than conventional sintering. PURPOSE The purpose of this study was to compare the fracture toughness of 3 mol % Y2O3-stabilized ZrO2 sintered in a conventional or micro...

The rapidly solidified prealloyed alpha brass powder with a size range of 40 to 100 μm produced by water atomization process was consolidated using liquid phase sintering process. The relationships between sintering temperature, physic-mechanical properties and microstructural characteristics were investigated. Maximum densification was obtained at 930 °C, under 600 MPa compacting pressure,...

Implementation of an accurate sintering model into a finite element simulation program can significantly improve Powder Metallurgy (P/M) part properties and processing efficiency. The densification and creep behavior of stainless steel powders during free sintering has been simulated and the material model has been implemented by linking user subroutines to the ABAQUS finite element code. This ...