field capacity, fuel consumption and drive wheel slippage in massey ferguson (mf399) tractor with standard and liquid ballasted (630 kg) axle load and at 4wd mode was evaluated and compared. the tests were conducted at the experimental station, college of agriculture, shiraz university, in a field with clay loam soil at average moisture content of 18% d.b. the experiment was of a randomized com...

The purpose of this document is to describe important tire characteristics and their effect on vehicle performance. Characteristics considered are those that the Formula SAE judges have deemed important for discussion on tires at competition and include coefficient of friction, slip angle, slip ratio, camber angle, cornering stiffness, camber stiffness, self-aligning torque, normal load sensiti...

Several transitions in the friction coefficient with increasing load are found on Au(111) in sulfuric acid electrolyte containing Cu ions when a monolayer (or submonolayer) of Cu is adsorbed. At the corresponding normal loads, a transition to double or multiple slips in stick-slip friction is observed. The stick length in this case corresponds to multiples of the lattice distance of the adsorbe...

Understanding the frictional properties of nanostructured surfaces is important because of their increasing application in modern miniaturized devices. In this work, lateral force microscopy was used to study the frictional properties between an AFM nanotip and surfaces bearing well-defined nanodomes comprising densely packed prolate spheroids, of diameters ranging from tens to hundreds of nano...

different methods for detecting broken bars in induction motors can be found in literature. many of these methods are based on evaluating special frequency magnitudes in machine signals spectrums. current, power, flux, etc are among these signals. frequencies related to broken rotor fault depend on slip. in industrial environment due to some phenomena - such as load oscillation, other faults an...

Many types of micro-electro-mechanical-system (MEMS) based products are currently employed in a variety of applications. However, high friction in these systems is a problem which limits the development of MEMS devices in which sliding contacts are involved. The aim of this research is to evaluate the effect of boundary slip on the hydrodynamic friction in a low load lubricated MEMS, in particu...

The nanoscale anisotropic elastic-plastic behavior of single-crystal aragonite is studied using nanoindentation and tapping mode atomic force microscopy imaging. Force-depth curves coaxial to the axis exhibited load plateaus indicative of dislocation nucleation events. Plasticity on distinct slip systems was evident in residual topographic impressions where four pileup lobes were present after ...

This project explores the viability of using machine learning to detect when objects are slipping through the grasp of a robotic hand. To that end, this paper discusses how one might use classification to identify when objects are sliding over the surface of a load cell that could be installed in a robotic hand. It is found that through proper feature selection, slipping loads can be distinguis...

We propose a generic model to describe the mechanical response and failure of systems which undergo a series of stick-slip events when subjected to an external load. We model the system as a bundle of fibers, where single fibers can gradually increase their relaxed length with a stick-slip mechanism activated by the increasing load. We determine the constitutive equation of the system and show ...