The CuNiCA nanopanicles have been synthesized by sol-gel auto-combusson. microwave and co-precipitationtechniques. Then, the results of the three techniques were compared. In the vol-ael auto-combustion synthesiswas used glycine as a fuel. At first, sol was prepared. Then, gel was achieved from drying so'. The prepared gelwas burnt at 350°C. In the noicrowavc technique, gel was prepared. Then, ...

This paper presents experimental analysis and results of GaN (being a III-V semiconductor) doped with Ferrite elements synthesized using Sol-Gel technique which are carried out at National Chemical Laboratory, Pune Maharashtra. The GaN is employed as dopant for x=1 and x=5, in the formula Ga(2x) N Fe2(49-x) O3 . A non-spinel ferrite system ( Fe2 O3) is chosen for our study. The XRD (Structural)...

Nanocrystalline ZrO2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. The overall process involved three steps: formation of homogeneous sol at 50-55°C; formation of dried gel at 110°C, and combustion of the dried gel at 400°C. Experiments revealed that ZrO2 dried gel derived from glycine (Fuel) and nitrate sol exhibited self pr...

In this paper, strontium ferrite (SrO.6Fe2O3) was synthesized by the sol-gel auto-combustion process. The thermal behavior of powder obtained from self-propagating combustion of initial gel was evaluated by simultaneous differential thermal analysis (DTA) and thermo gravimetric (TG), from room temperature to 1200°C. The as-burnt powder was calcined at various temperatures from 700-900°C to achi...

The dried nitrate-urea gels exhibit the combination of autoicatatric combustion behavior and ultrasonic, whichcan be used to synthesize the nanocatalyst ferrite powders. Cu and Ni Unites nanocatalyst powders sithcomposition of Caned], and NiFe204 were synthesized by a sol-gel auto catalnic combustion process. Themolar ratio between metal ions and urea was 11.2. The sob gel process was done at 8...

background: radioactive yttrium glass microspheres are used for liver cancer treatment. these yttrium aluminum silicate microspheres are synthesized from yttrium, aluminum and silicone oxides by melting. there are two known processes used to transform irregular shaped glass particles into microspheres, these ‘spheroidization by flame’ and ‘spheroidization by gravitational fall in a tubular furn...

zno and zro2 photo catalysts were synthesized by sol-gel auto combustion method. the products were characterized by x-ray diffraction (xrd) and scanning electron microscopy (sem). structural and morphological properties of nano particles were investigated and the average crystalline size of zno and zro2 was obtained 44 and 51 nm, respectively. also, photo catalytic degradation of nitro phenol f...

The role of iron in two modes of integration into alumina catalysts was studied at 0.39 wt% Fe and tested in trichloroethylene combustion. One modified alumina was synthesized using the sol-gel method with Fe added in situ during hydrolysis; another modification was performed using calcined alumina, prepared using the sol-gel method and impregnated with Fe. Several characterization techniques w...

The effect of Nickel doped Cobalt ferrite nano particles Ni0.2CoxFe2-x04(x=0.1, 0.2, 0.3, 0.5) Created by sol-gel auto combustion technique using citric acid as fuel. single phase cubic structure form confirm the XRD. crystalline size calculated FWHM (311) plane Scherer’s formula. typicalsize sample varies in order regime. structural and lattice parameter were obtained XRD data. surface morphol...

The composite powders of barium-magnesium ferrite were prepared using sol-gel auto-combustion and microwave methods. The crystal structure and the shape of nanocomposites have been compared. X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Vibrating Sample Magnetometer (VSM) were used to investigate the structural, morphological and magnetic properties of nanopowder. The formatio...