The adsorption potential of iron acetate coated activated alumina (IACAA) for removal of arsenic [As (III)] as arsenite by batch sorption technique is described. IACAA was characterized by XRD, FTIR, EDAX and SEM instruments. Percentage adsorption on IACAA was determined as a function of pH, contact time and adsorbent dose. The study revealed that the removal of As (III) was best achieved at pH...

The mechanism, isotherms and kinetics of removal of two endocrine disrupting chemicals, 17β-estradiol (E2) and 17αethinyloestradiol (EE2) by activated carbon adsorption were investigated in an agitated non-flow batch adsorption studies. Mathematical models were used to describe the adsorption phenomenon with the kinetic and thermodynamic parameters evaluated using the adsorption equilibrium dat...

This study investigated the influence of solution salinity, pH and the sediment characteristics on the sorption and desorption of perfluorooctane sulfonate (PFOS). The results showed that the sorption of PFOS onto sediment increased by a factor of 3 as the CaCl(2) concentration increased from 0.005 to 0.5 mol L(-1) at pH 7.0, and nearly 6 at pH 8.0. Desorption hysteresis occurred over all salin...

Activated carbon prepared from Tamarindus Indica fruit shells has been used for the removal of two basic dyes, namely, rhodamine B and malachite green from aqueous solutions. Freundlich, Langmuir and Redlich-Peterson isotherm equations were used to fit the equilibrium adsorption data and the isotherm parameters were evaluated. The Langmuir monolayer adsorption capacity was found to be 3.1 mg/g ...

Magnetically modified activated carbon, which synthesized by nanomagnetic iron oxide, was used for fast and effective removal of Crystal Violet from aqueous solutions. The scanning electron microscopy (SEM) images of nano-adsorbent showed that the average sizes of adsorbent are less than 100 nm. The various parameters, affecting on adsorption process, were examined including pH and temperature ...

Fluorine-doped carbon nanotubes were synthesized using cobalt and silver co-catalyst on magnesium oxide support and their morphological features studied using Raman spectroscopy, energy dispersive spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction spectroscopy. The morphological images showed amorphous multiwall nanotubes with s...

In this study, batch sorption and desorption experiments were conducted for testosterone using four agricultural soils and five clay minerals. Significant differences in sorption behavior were observed between abiotic and biotic systems. The Freundlich sorption coefficient Kf ðμg=gÞ=ðμg=mLÞn ranged from 8.53 to 74.46 for soils and from 35.28 to 1,243 for clays. The maximum sorption capacity (μg...

In the present work, the influence of temperature on kinetics and equilibrium of methylene blue sorption from synthetic aqueous solutions, in single dye solutions, using almond peel as a sorbent material has been investigated in batch conditions. Temperature played an important part in sorption phenomenon: the methylene blue sorption increased as temperature increased. The pseudo second-order m...

In environmental studies, we need to be able to predict the behaviour of contaminants in more or less complex physico-chemical contexts. The improvement of this prediction partly depends on establishing thermodynamic models that can describe the behaviour of these contaminants and, in particular, the sorption reactions on mineral surfaces. In this way, based on the mass action law, it is possib...