Bulk samples of Pd41Ni10Cu29P20 glass were tested at constant true stress s20–636 MPad in compression at 550, 555, and 565 K to study the transition from steady-state creep at low stress to deformation-induced softening at high stress. In the high-stress regime strongly accelerating creep was observed. All deformation was homogeneous. The activation volume was 106 Å3. The isoconfigurational act...

The dynamic and static yield stress of fresh cement mortar were measured in a rotational rheometer with a vane geometry using shear rate and shear stress-controlled protocols, respectively. Through a shear rate-controlled steady-state protocol, the equilibrium flow curve is measured and fitted with the Bingham model to obtain dynamic yield stress. A negative slope in the equilibrium flow curve,...

A simple model based on the Orowan equation and the dynamic evolution of the dislocation structure by generation and merging of slipped areas is used to see which experimental results on creep of pure and solute-hardened crystalline materials can or cannot be explained with regard to creep with refinement or coarsening of the dislocation structure and steady-state creep. Quantitative deficienci...

Indentation creep tests and finite element simulations were performed on a model material to show that the constitutive equation for conventional uniaxial creep can be derived using the instrumented indentation testing technique. When the indentation pressure and the indentation creep rate are maintained at constant values of ps and _ 3⁄4inðsÞ, respectively, the contours of the equivalent stres...

Creep deformation in < 001 > oriented single crystals of CMSX-3 has been studied at temperatures around 850°C at a stress level of 552 MPa. Detailed observations of the evolution of the dislocation structure during creep have been made. TEM stereo pairs show creep deformation in the matrix phase, leaving the 7’ precipitates undeformed. In previously undeformed crystals there is a brief incubati...

The Steady state creep behaviour of a functionally graded cylinder made of isotropic composite containing varying distribution of silicon carbide particles has been investigated by a mathematical model. The creep behaviour of the FGM is described by a Norton&apos;s Power law. The effect of varying distribution of SiCP particles of creep stresses and creep rates in the FGM cylinder has been anal...

We present experimental evidence that pressure solution creep does not establish a steady-state interface microstructure as previously thought. Conversely, pressure solution controlled strain and the characteristic length scale of interface microstructures grow as the cubic root of time. Transient creep with the same scaling is known in metallurgy (Andrade creep). The apparent universal scaling...