The strain hardening behavior of model polymer glasses is studied with simulations over a wide range of entanglement densities, temperatures, strain rates, and chain lengths. Entangled polymers deform affinely at scales larger than the entanglement length as assumed in entropic network models of strain hardening.The dependence of strain hardening on strain and entanglement density is also consi...

in this research formability behavior and texture of st14 low carbon steels produced by foolad mobarakeh plant for deep drawing application had been studied. plate textures were characterized by x-ray diffraction technique. to evaluate formability behavior one dimensional tensile test was carried out and related parameters were recognized. moreover eriksson experiment and spherical pattern prin...

Dynamic recrystallization (DRX) processes are widely used in industrial hot working operations, not only to keep the forming forces low but also to control the microstructure and final properties of the workpiece. According to the second derivative criterion (SDC) by Poliak and Jonas, the onset of DRX can be detected from an inflection point in the strain-hardening rate as a function of flow st...

In the present article, a new method for the determination of the hardening law using the load displacement curve, F–h, of a spherical indentation test is developed. This method is based on the study of the error between an experimental indentation curve and a number of finite elements simulation curves. For the smaller values of these errors, the error distribution shape is a valley, which is ...

The digital image correlation (DIC) technique was utilized in conjunction with mechanical experiments carried out at different strain rates to study the negative strain rate sensitivity (NSRS) in face-centered cubic (fcc) Hadfield steels. The results shed light onto the variation of local strain fields and serrations in the stress– strain curves of Hadfield steels as a function of strain rate w...

Modeling fuel behavior requires an accurate description of the cladding stress response for both operational and safety considerations. The transient creep response of Zirconium alloys is commonly modeled using a strain hardening rule which is known to hold in cases with monotonously increasing stresses. However, the strain hardening rule is experimentally known to fail in scenarios such as loa...

We analyze the stability of homogeneous simple tensile/compressive deformations of an isotropic heat-conducting thermoviscoplastic bar by studying the growth of infinitesimal perturbations superimposed upon a homogeneous deformation. The smallest axial strain at which the superimposed perturbation has a positive initial growth rate is called the instability strain. Two criteria are used to dete...

In this paper we present a modeling approach to bridge the atomistic with macroscopic scales in crystalline materials. The methodology combines identification and modeling of the controlling unit processes at microscopic level with the direct atomistic determination of fundamental material properties. These properties are computed using a many body Force Field derived from ab initio quantum-mec...

The data presented in this article are related to the research article entitled "On the plasticity mechanisms of lath martensitic steel" (Jo et al., 2017) [1]. The strain hardening behavior during tensile deformation of a lath martensitic press hardening steel was described using a dislocation density-based constitutive model. The Kubin-Estrin model was used to describe strain hardening of the ...

Super 304HCu austenitic stainless steel containing 2.3–3 (wt.%) of Cu is mainly used in superheaters and reheaters tubing of ultra super critical boilers which operates over 600 ◦C of steam temperature. Tensile tests were carried out on Super 304HCu, using nominal strain rate of 1 × 10−3 s−1, at room temperature, 550 ◦C, 600 ◦C and 650 ◦C. The tensile strength and elongation were found to decre...