One of the main problems associated with generation wind energy in offshore platforms is analysis behavior soil when pile driven into seabed. Nowadays, due to large dimensions foundations (hollow steel piles up 8 m diameter and 15–20 cm thickness), there are no scale studies carried out that analyze mechanical deformational where as well material supports motor. This paper presents results obta...

The present study examines the use of collars and geobags for reducing local scour around bridge piles. The efficiency of collars and geobags was studied experimentally. The data from the experiments were compared with data from earlier studies on the use of single piles with a collar and with a geobag. The results showed that using a combination of a steel collar and a geobag yields the most s...

We report experiments on piles of cohesionless granular materials showing the effect of construction history on static stress distributions. Stresses under piles are monitored by sensitive capacitive techniques. The piles are formed either by pouring granular material from a funnel with a small outlet (localized source), or from a large sieve (homogeneous rain). Localized sources yield stress p...

Alkaline copper quaternary (ACQ) is a widely used wood preservative. This study evaluated leachate volume generation and contaminant leaching from ACQ-treated lumber during rainfall events in comparison to untreated lumber. The influences of wood preservation with ACQ, lumber size, and weather on leachate generation ratio and contaminant concentrations in wood leachate were investigated with fo...

The effect of pile mixing on greenhouse gas (GHG) emissions during dairy manure composting was determined using large flux chambers designed to completely cover replicate pilot-scale compost piles. GHG emissions from compost piles that were mixed four times during the 80 day trial were approximately 20% higher than emissions from unmixed (static) piles. For both treatments, carbon dioxide (CO(2...

Offshore anchor piles are seafloor moorings that keep the position of floating structures during a harsh environment. These piles are usually subjected to a wide range of monotonic and cyclic lateral-to-oblique pullout forces. Centrifuge tests were carried out to study the behavior of offshore anchor piles under mooring forces in saturated dense sand. The tests were carried out at different loa...

Slope reinforcement and the use of structural pile elements can be an effective slope remediation alternative when conventional remediation practices (e.g., improved drainage) fail to consider the causal factors leading to slope instability (e.g., strength loss due to weathering). An experimental research program was aimed at developing a rapid, cost-effective, and simple remediation system tha...

We present systematic and detailed measurements of interparticle contact forces inside three-dimensional piles of frictionless liquid droplets. We measured long-range chainlike correlations of the directions and magnitudes of large forces, thereby establishing the presence of force chains in three dimensions. Our correlation definition provides a chain persistence length of 10 mean droplet diam...

and findings of laboratory and field tests of a new generation of precast composite piles used for the first time in the construction of the Route 40 highway bridge over the Nottoway River in Virginia. The piles consisted of 24.6 in. (625 mm) diameter concrete-filled glass fiber reinforced polymer (GFRP) circular tubes, with a 0.21 in. (5.3 mm) wall thickness. The composite piles extended above...

This paper presents the results of a series of numerical analysis carried out on piles in cohesive soils. Broms (1964a) proposed graphs to obtain ultimate lateral bearing capacity of such piles. However, the graphs do not cover all piles with different lengths. In this study, a finite difference program that is especially designed for piles is used. The investigations were carried out by varyin...