Calibration of the Madison Symmetric Torus Thomson scattering system has been refined to improve temperature fluctuation measurements. Multiple avalanche photodiodes have been directly calibrated for use as reference detectors during calibration, improving accuracy and ease of use. From the absolute calibration we calculate corrections to the gain for variation in detector operating temperature...

Abstract This paper investigates in-situ thermographic imaging of a CMP pad during polish to extract spatial endpoint uniformity and polish rate uniformity across the wafer. IR images of the pad contain subtle temperature gradients masked by noise, making endpoint detection difficult. Also effects such as slurry flow, head oscillation, camera angle, and a baseline temperature increase in the pa...

Microwave processing of materials has been found to deliver enormous advantages over conventional processing methods in terms of mechanical and physical properties of the materials. However, the non-uniform temperature distribution is the key problem of microwave processing, which is related to the structure of the cavity, and the placement and physical parameters of the material. In this paper...

the growth rate and uniformity of carbon nano tubes (cnts) based on chemical vapor deposition (cvd) technique is investigated by using a numerical model. in this reactor, inlet gas mixture, including xylene as carbon source and mixture of argon and hydrogen as  carrier gas enters into a horizontal cvd reactor at atmospheric pressure. based on the gas phase and surface reactions, released carbon...

In a polymer membrane fuel cell more than half of the chemical energy of hydrogen is converted to heat during generation of electricity. This causes an increase in the cell temperature. The Cooling field design has a significant role in cell cooling. The cell's performance and stability are reduced due to inappropriate heat dissipation. In this paper, the cooling flow and heat transfer in cooli...

Flash sintering is one of the newest techniques for sintering ceramics to near full density. It occurs in an appropriate combination of temperature and electric field. Temperature measurement is one of the most serious challenges in this process. In the present study, we tried to model a flash sintering process of 8YSZ and 3YSZ with finite element method to make an assessment for temperature di...

Plasma-enhanced atom layer deposition (PEALD) can deposit denser films than those prepared by thermal ALD. But the improvement on thickness uniformity and the decrease of defect density of the films deposited by PEALD need further research. A PEALD process from trimethyl-aluminum (TMA) and oxygen plasma was investigated to study the influence of the conditions with different plasma powers and d...

Textured polyester multifilament yam was subjected to swelling in single and mixed solvents (with varying ratio) at room temperature for different durations. The changes in the structure and properties of the yam were investigated by measuring birefringence, crystallinity, critical dissolution time, shrinkage on treatment, % change in bulk, residual shrinkage, crimp rigidity, dye uptake and dye...