Polyamide 6 / nitrile butadiene rubber / nanoclay (PA6/NBR/clay) nanocomposite has gathered wide acceptance in industry. Laser welding, as a fabrication method, is applied to welding of polymer nanocomposites. In this study, the input parameters (clay (Closite 30B) content, laser power, scan velocity and stand-off-distance) are varied to achieve the best responses (tensile strength of welds). R...

prior to the design and construction of any fruit harvesting machine it is essential to know the physical and mechanical properties of the trees and of its fruits. an example could be cited as the force needed to overcome. the strength with which the fruit is attached to the stem, in trunk shaker harvesting. in this research the acting forces on the fruit during harvest, including tensile stren...

Polymer-based nanocomposites due to their advantages such as corrosion resistance,adequate mechanical properties and low cost are widely used in modern technologies. The increasing application of these nanocomposites, and hence their welding seems unavoidable. In this paper, a novel hottool in friction stir welding process is used for butt welding nanocomposite plates of 5 mm thick containing p...

in this research formability behavior and texture of st14 low carbon steels produced by foolad mobarakeh plant for deep drawing application had been studied. plate textures were characterized by x-ray diffraction technique. to evaluate formability behavior one dimensional tensile test was carried out and related parameters were recognized. moreover eriksson experiment and spherical pattern prin...

The predictability of masonry arch bridges and their behaviour is widely considered doubtful due to the lack of knowledge about the conditions of a given masonry arch bridge. The assessment methods for masonry arch bridges are MEXE, ARCHIE, RING and Frame Analysis Method. The material properties of the masonry and fill material are extremely difficult to determine accurately. Consequently, it i...

Freezing-thawing resistance is a very significant characteristic for concrete in severe environment (such as cold region with the lowest temperature below 0°C). In this study, ordinary-air-entrained (O-A-E) concrete was produced in a laboratory environment; the compressive strength, cubic compressive strength of C50, C40, C30, C25, and C20 ordinary-air-entrained concrete, tensile strength, and ...

Tensile strength is one of the important strength parameters of concrete. Indirect methods have been used up till now for its measurement. These methods though widely accepted, do not furnish the true tensile strength of concrete. This paper presents a new approach for the experimental determination of true tensile strength of concrete. Results obtained by this test are quite encouraging and sh...

polyurethane/zeolite 13x nanocomposite films were fabricated using solution casting method. the synthesized nanocomposite films were structurally characterized using sem, tga and tensile analysis. sem images showed appropriate distribution of nanocrystalline zeolite particles within polyurethane matrix. better thermal stability of nanocomposite films in comparison to neat polyurethane was shown...

this study investigates the correlations among the tensile strength, mineral composition, and textural features of twenty-ninesandstones from kouzestan province. the regression analyses as well as artificial neural network (ann) are also applied to evaluatethe correlations. the results of simple regression analyses show no correlation between mineralogical features and tensile strength.however,...