Thermoplastic polyurethanes (TPUs) are a class of thermoplastic elastomers (TPEs) that are used in a variety of applications (1). TPUs exhibit low temperature flexibility, excellent abrasion resistance, high tensile strength and good processing characteristics. The current medical grade TPU’s have unique property that the flex modulus decreases (softens) when placed in the body. A new resilient...

Low skid resistance of road marking paint is one of the major issues in the safety of vehicle drivers, cyclists, and pedestrians when traveling on the city streets. Among the variety of marking paint, two-component paint is widely used at intersections and roundabouts. Therefore, the paint used should have adequate skid resistance. The object of this study was to evaluat...

In this investigation an elastic stress analysis is carried out a woven steel fiber reinforced thermoplastic cantilever beam loaded uniformly at the upper surface. The composite beam material consists of low density polyethylene as a thermoplastic (LDFE, f.2.12) and woven steel fibers. Granules of the polyethylene are put into the moulds and they are heated up to 160°C by using electrical resis...

Flax fibres are oftenly used for reinforcing thermoplastic to manufacture biocomposite materials exhibiting numerous advantages such as high mechanical properties, low density and biodegradability. The mechanical properties of a biocomposite material depends on the nature and orientation of the fibres, the nature of the matrix and mainly on the adhesion between fiber and the polymer matrix. The...

A unique technique for the rapid fabrication of thermoplastic microfluidic chips is described. The method enables the realization of fully-sealed microchannels in around one hour while requiring only minimal infrastructure by taking advantage of a solvent swelling mechanism that allows raised features to be patterned on the surface of homogeneous thermoplastic materials. Patterning is achieved ...

Thermoplastic vulcanizates (TPVs) are a special class of thermoplastic elastomers, which are produced by simultaneously mixing and crosslinking a rubber with a thermoplastic polymer at an elevated temperature. Peroxide-cured TPVs based on blends of silicone rubber and thermoplastic Engage of two different types, mainly ethylene-octene and ethylenebutene copolymers at different blend ratios have...

in this study, the effective factors on warpage in short fibre reinforced thermoplastic composites has been studied. first of all, the effective factors in manufacturing process were detected and then in order to decrease the number of experiments, the approach of design of experiments has been applied. by using micromechanics theory in composites and coefficients of thermal expansion models, a...

the purpose of this research is to analyze differential adpositional case marking (dacm) in vafsi within ot framework by using the generalization of aissen’s (2003) differential object marking (dom) model. while bossong (1985) has traced dom in more than 300 languages, dacm has not been investigated typologically, yet. dacm, as a branch of differential case marking (dcm), questions the effect o...

We report a cost-efficient and easy to implement process for fabricating microfluidic reactors in thermoplastic materials. The method includes (i) the fabrication of an imprint template (master), which consists of a photoresist deposited on a metal plate; (ii) the thermoembossing of the reactor features into polymer sheets; (iii) the activation of the embossed and planar thermoplastic surfaces;...

This contribution reviews elastomeric materials with photo-actuation behavior with emphasis on thermoplastic elastomers and their composites. The principles of the photo-actuation and the main factors affecting the photo-actuation phenomena of thermoplastic elastomer materials are discussed in detail. The well-performing photoactuating systems involving both statistical and block copolymers-bas...