A systematic study of the local convective heat transport in turbulent thermal convection is carried out in small-aspect-ratio cells filled with water. The local convective heat flux is obtained from the simultaneous velocity and temperature measurements over varying Rayleigh numbers and spatial positions across the entire convection cell. Large fluctuations of the local convective heat flux ar...

Heat transfer coefficient in nucleate pool boiling near critical heat flux at least one orderhigher than the convectional heat transfer modes. In this paper, an experimental setup isdesigned and fabricated to investigate the mechanism of heat transfer from boiling surface tobulk liquid near critical heat flux. The images of pool boiling near the high heat flux regionreveals that the individual ...

Wildland firefighters work in unfavourable environments involving both heat and moisture. Moisture in clothing systems worn by wildland firefighters may increase or decrease heat transfer, depending on its source and location in the clothing system, location on the body, timing of application and degree of sorption. In this experiment, 4 outerwear/underwear combinations were exposed to 1 of 5 d...

Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...

The very essence of a hydrothermal system is transfer of heat by a convecting fluid. Despite this central role played by heat transfer, we have a woefully poor knowledge of the flux of heat from seafloor hydrothermal systems and its variation through time. This lack of knowledge is not from a lack of trying. Many different investigators have made estimates of the flux of heat from seafloor hydr...

sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. but square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

[1] Incoming radiation forcing at the land surface is partitioned among the components of the surface energy balance in varying proportions depending on the time scale of the forcing. Based on a land-atmosphere analytic continuum model, a numerical land surface model, and field observations we show that high-frequency fluctuations in incoming radiation (with period less than 6 h, for example, d...

In the design of heat exchangers, it is necessary to determine the heat transfer rate between hot and cold fluids in order to calculate the overall heat transfer coefficient and the heat exchanger efficiency. Heat transfer rate can be determined by inverse methods. In this study, the unknown space-time dependent heat flux imposed on the wall of a heat exchanger internal tube is estimated by app...

This paper extends previous large-eddy simulations of the convective boundary layer over a surface with a spatially varying sensible heat flux. The heat flux variations are sinusoidal and onedimensional. The wavelength is 1500 or 4500 m (corresponding to 1.3 and 3.8 times the boundarylayer depth. respectively) and the wind speed is 0. 1 or 2 m sI. In every case the heat flux variation drives a ...

Smart cooling solutions are required for modern electronic devices as heat flux is continuously increasing while component size is shrinking day by day. Two phase heat transfer within compact channels can cope with high heat flux applications. Two phase heat transfer in narrow channels was the subject of many studies from last decade. The mechanisms involved, however, are not fully clear and th...