During combustion of solid fuels in the material inlet end of cement rotary kilns, local reducing conditions can occur and cause decomposition of sulfates from cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2 concentration, which may cause deposit formation in the kiln system. SO2 release from cement raw materials during combustion of solid f...

owing to elastic and viscous characteristics embedded rubber compounds, the dissipated energy from periodic deformation is converted into heat generation and consequently, the tire may have different body temperatures for different operating conditions. in most performed investigations, just temperature distribution is considered and the mechanical behaviour of rubber parts which are highly tem...

Periodic deformation of a tire during its rolling motion causes energy dissipating and heat generation due to hysteretic nature of the rubber. The increase in tire temperature may have disastrous effects on safe service life and safety of vehicles. In this study a numerical simulation based on finite element method is used for evaluating the effect of various working conditions on temperature f...

While a new tire may have excellent resistance to crack initiation and propagation between the steel belts, an aged tire of the exact same construction can exhibit dramatically reduced crack growth resistance, which in some cases may contribute to tire failure. This article will review the research that has gone into quantifying the rate of oxidation the steel belt rubber oxidizes in different ...

─ In a tire pressure monitoring system in which a pressure censor and a transmit antenna are contained in a tire, electromagnetic simulations of radiations from carcass embedded tires are requested. However, it is difficult to accurately determine these shielding effects. In this study, methods for performing accurate electromagnetic simulation by adopting the MoM scheme are determined. In the ...

2 Executive Summary The purpose of this paper is to familiarize the reader with the paving material asphalt-rubber (A-R) by providing historical perspective on its development and obstacles to its development. A-R has been a constant and stable market for crumb rubber producers in the United States most significantly within the vicinity of Arizona, California, and Florida. Agencies use A-R beca...

OBJECTIVES The purpose of this study is to evaluate the tire manufacturing work environments extensively and to identify workers' exposure to hazardous substances in various work processes. METHODS Personal air sampling was conducted to measure polycyclic aromatic hydrocarbons, carbon disulfide, 1,3-butadiene, styrene, methyl isobutyl ketone, methylcyclohexane, formaldehyde, sulfur dioxide, a...

The viscoelastic effect of rubber material on creation of rolling resistance is responsible for 10-33% dissipation of supplied power at the tire/road interaction surface. So, evaluating this kind of loss is very essential in any analysis concerned with energy saving. The transient dynamic analysis for including the rolling effects of the tire requires long CPU time and the obtained results are ...

The 20-40mm particle size of crushed aggregate and rubber aggregate showed 100% passing but river sand showed zero%. The 10 mm particle size of river sand showed 100% passing. Hydraulic conductivity ranges from 0.5 cm/sec (0.2 inches/sec) for compressed 10–38 mm (0.4–1.5 inches) shreds to more than 20 cm/sec (8 inches/sec) for 25–64 mm (1– 2.5 inches) loose shred. Thermal conductivity varies fr...