The purpose of this project was to observe the amount of apical and mid-curve transportation produced by a range of nickel titanium (NiTi), titanium alloy and stainless steel (SS) files. Tests were carried out in simulated curved root canals produced in epoxy resin blocks. Seven commercially available file types were tested using sizes 15 to 40. Instrumentation was carried out to 1 mm beyond th...

The aim of this in vitro study was to investigate the frictional characteristics of two types of self-ligating brackets ('A' Company Damon SL and Adenta Time brackets) and two types of pre-adjusted edgewise brackets (TP Tip-Edge and 'A' Company Standard Twin brackets). The test brackets were glued to steel bars and aligned using a preformed jig. Five combinations of archwire size and material w...

Previous experiments have shown that tritium is produced in deuterated titanium. To better define the phenomenon a series of tests have been performed using various metals and alloys and different deuterating conditions. Sheets and shavings of titanium, zirconium, hafnium, tantalum, Zircaloy 2 and Ti-Zr 50% alloy have been tested. A statistical analysis of the tritium production shows that sign...

A new manufacturing method of twisting nickel titanium wire to produce rotary nickel titanium (RNT) files has recently been developed. The aim of the present study was to evaluate whether the new manufacturing process increased the angular deflection of RNT files, by comparing instruments produced using the new manufacturing method (Twisted Files) versus instruments produced with the traditiona...

This work presents the results of studies structural-phase state tantalum coatings obtained by magnetron deposition on substrates titanium nickelide in austenite-martensitic state. The temperature during coating did not exceed 100 ° C. was determined X-ray diffraction at different stages formation. It is shown that initial stage deposition, two-phase (α- and β-Ta) are formed. synthesis a Ta lea...

The clinical endodontic breakthrough was progressing from utilizing a long series of stainless steel (SS) hand files and several rotary Gates Glidden drills to integrating nickel titanium (NiTi) files for shaping canals. Regardless of the methods utilized, the mechanical objectives for canal preparation were brilliantly outlined almost 40 years ago by Dr. Herbert Schilder.1 When properly perfor...