The Fischer–Tropsch (FT) synthesis is traditionally associated with fossil fuel consumption, but recently this technology has emerged as a keystone that enables the conversion of captured CO2 sustainable hydrogen to energy-dense fuels and chemicals for sectors which are challenging be electrified. Iron-based FT catalysts promoted alkali transition metals improve reducibility, activity, selectiv...

With an increase in energy consumption globally, Fischer-Tropsch (FT) synthesis is a good alternative for producing fuels and chemicals from coal, natural gas or biomass. Among them, coal to liquids has been put into production countries that have large reserves. In this process, Fe-based catalysts are commonly used due their earth abundance, comparatively wide operation range ready availabilit...

Cobalt-based catalysts are widely used to produce liquid fuels through the Fischer-Tropsch (FT) reaction. However, the cobalt nanocatalysts can exhibit intriguing size-dependent activity whose origin remains heavily debated. To shed light on this issue, the electronic structures of cobalt nanoparticles with size ranging from 4 to 10 nm are studied using soft X-ray absorption (XAS) and resonant ...

A continuous process involving gasification, syngas cleaning, and Fischer-Tropsch (FT) synthesis was developed to efficiently produce synthetic aviation turbine fuels (SATFs). Oak-tree wood chips were first gasified to syngas over a commercial pilot plant downdraft gasifier. The raw wood syngas contains about 47% N(2), 21% CO, 18% H(2), 12% CO(2,) 2% CH(4) and trace amounts of impurities. A pur...

the potential of carbon nanotubes (cnt) supported cobalt catalysts for fischer-tropsch (ft) reaction is shown. using the wet impregnation method cobalt on carbon nanotubes catalysts were prepared with cobalt loading varying from 15 to 45 wt. %. the catalysts are characterized by different methods including: bet physisorption, x-ray diffraction, hydrogen chemisorption, and temperature-programmed...

A model Co/SiO2 catalyst was prepared by depositing cobalt on silica films in ultrahigh vacuum conditions. Fischer–Tropsch synthesis was carried out at a total pressure of carbon monoxide and hydrogen between 0.33 and 1.0 bar. The effects of reaction temperature and pressure on kinetics and chain growth probability were investigated. The turnover frequency, activation energy, and product distri...

Nano-structure of Co–Mn spinel oxide was prepared by thermal decomposition method using [Co(NH3)4CO3]MnO4 as the precursor. The properties of the synthesized material were characterized by X-Ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), Transmission Electron Microscopy (TEM), surface area measurements, Energy-Dispersive X-ray (EDX) spectroscopy analys...

Fisher-Tropsch synthesis (FTS) is a promising method to make alternative hydrocarbons from biomass or other resources. Upgrading the primary FTS products of considerable interest. Cracking FT wax economically attractive produce light olefins. Herein, effects zeolite type, Si/Al ratio ZSM-5, and reaction condition on catalytic cracking were investigated. It was found that pore structure acid pro...

The determination of the catalyst’s active phase helps improve catalytic performance Fischer–Tropsch (FT) synthesis. Different phases cobalt, including cobalt oxide, carbide, and metal, exist during reaction. content each can affect product distribution. In this study, a series carbide catalysts were synthesized by exposure Co/Al2O3 catalyst to CH4 at different temperatures from 300 °C 800 °C. ...

While Fischer-Tropsch synthesis (FTS) using coal and natural gas in conventional reactors is an almost well-established technology, the production of liquid hydrocarbons from syngas obtained from biomass is in its preliminary stages of commercialization in countries like Germany. With concerns about global warming and ways of disposing of CO2 being searched for, CO2 hydrogenation using FTS to l...