Gravity drainage is one of the important recovery mechanisms in fractured carbonate and conventional reservoirs. It occurs due to density difference between the gas in fracture and the oil in matrix as well as in conventional tilted reservoirs. Oil phase will form films which are produced under gravity forces (film flow). Many gas injection experiments have been done on laboratory scales with d...

The ultimate aim of any oil recovery operation at sea is to collect as much floating oil as is reasonably and economically possible. However, a review of past spills shows that rarely is more than 10% of spilled oil recovered from the sea surface. Although many methods of mechanical containment and recovery exist, each has its own limitations which affect the overall success of a recovery opera...

Isolated helical strips of cat portal vein were subjected to sudden stresses to produce immediate elastic extension followed by a slow plastoelastic extension or "creep." Recovery from this creep was evaluated by restretching with varying intervals between stretches. In appropriately stimulated vessels, significant creep recovery continues for periods in excess of 20 minutes. Both the rate and ...

a typical iranian carbonate matrix block surrounded by an open fracture was modeled in order to understand the fracture-matrix interaction and realize how to model the interaction best. the modeling was carried out by using a fine-scaled eclipse model in the single porosity mode (the fractures were explicitly modeled). the model was extended to a stack of 6 matrix blocks to understand block-to-...

gravity drainage is one of the important recovery mechanisms in fractured carbonate and conventional reservoirs. it occurs due to density difference between the gas in fracture and the oil in matrix as well as in conventional tilted reservoirs. oil phase will form films which are produced under gravity forces (film flow). many gas injection experiments have been done on laboratory scales with d...

a typical iranians carbonate matrix block surrounded by an open fracture was modelled in order to understand the fracture-matrix interaction and how to model the interaction best. this was modelled by using a fine-scaled eclipse model in the single porosity mode . the model was extended to a stack of 6 matrix blocks to understand block-to-block interaction under gas injection scenarios. results...

the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...