This paper presents the design and characterization of micro-fabricated 0.5 MHz silicon-based ultrasonic nozzles. Each nozzle is made of a piezoelectric drive section and a silicon-resonator consisting of five Fourier horns, each with half wavelength design and twice amplitude magnification. Results of impedance analysis and measurement of longitudinal vibration confirmed the simulation results...

In this study, diamond turning of an aluminiumbased metal matrix composite (MMC) reinforced with SiC particles was conducted with the assistance of ultrasonic vibrations. A simple and small size vibration device was designed to mount a piezoelectric transducer and a diamond insert onto a CNC machine. Turning experiments were carried out using a factorial design to investigate the effects of vib...

The nondestructive determination of the maturity of durian is an important process for quality control. Since durian has specific properties, such as the thickness of peel, non-uniformity of shape, roughness of prickle skin, largeness of size etc., the nondestructive determination of the maturity is hard to perform. This paper proposes two approaches for determining maturity of durian by using ...

The purpose of this study was to determine the effectiveness of ultrasonic vibration in removing Paraposts from extracted teeth. Paraposts were cemented in mandibular premolars to a depth of 9 mm with zinc phosphate cement and the teeth placed in four groups. Group 1 received no vibration. Group 2 received vibration for 4 min, group 3 received vibration for 12 min, and group 4 received vibratio...

Vibration power and amplitude are essential factors in ultrasonic drawing processes, especially for difficult-to-draw materials like titanium and its alloys. This paper presents a new composite power-superimposed ultrasonic vibrator for wire drawing which was driven by three separate ultrasonic transducers. The transducers were uniformly distributed around the circular cross section of the vibr...

in this paper, a new non-contact ultrasonic abrasive finishing mechanism is designed and fabricated. this mechanism combines the function of ultrasonic vibrations and the magnetic abrasive finishing (maf) process. a permanent magnet which is mounted on a horn has been used as the processing tool. this polishing tool is vibrated at an ultrasonic frequency with piezo-electric actuators. ultrasoni...

The design of slender power ultrasonic devices can often be challenging due to the excitation of parasitic modes of vibration during operation. The excitation of these modes is known to manifest from behaviors such as modal coupling which if not controlled or designed out of the system can, under operational conditions, lead to poor device performance and device failure. However, a report publi...

in this work, boehmite sol was prepared by a previously applied and validated method; hydrolysis of aluminum chloride hexa-hydrate. in order to obtain precise results, the effect of ph after adding precipitating agent, aging time, peptizing temperature and ultrasonic vibration time on the crystallite size of final precipitate were investigated in a narrow range. the preparation conditions appli...

Dynamic modulus of elasticity was determined in clearwood samples of eight tropical hardwood species using longitudinal vibrations, flexural vibration and ultrasonic transit-time methods. These samples were subsequently subjected to three point static bending test to determine static modulus of elasticity and modulus of rupture. Acoustic velocity and wood density were found to be independent pa...

The paper details the effects of depth of cut and vibration amplitude when ultrasonic assisted (US) creep feed grinding Inconel 718 with an open structured alumina based wheel. The workpiece was actuated at a constant frequency (~20.5kHz) via a block sonotrode attached to a 1kW piezoelectric transducer-generator system. A full factorial experimental array comprising 12 tests was conducted invol...