Abstract In this project, nano-ZrO2 particles were dispersed in aluminum powder by a Y-shape mixer. The particle size of ZrO2 powder was < 40 nm and the amount of ZrO2 reinforcement varies from 3 to 15%.The mixed powders were compacted .Subsequently the compacted discs were sintered both in the microwave oven and in the conventional muffle furnace .Using microwave –assisted sintering method led...

We have demonstrated the synthesis of γ-Fe2O3 nano-particles through a facile and novel calcination process in the air. There is no pH regulation, gas atmosphere, additive, centrifugation or other complicated procedures during the preparing process. A detailed formation process of the nano-particles is proposed, and DMF as a polar solvent may slower the reaction process of calcination. The stru...

Bionic self-cleaning surfaces with well-ordered polymer nano-fibers are firstly fabricated by disturbing crystallization during one-step coating-curing process. Orderly thin (100 nm) and long (5-10 μm) polymer nano-fibers with a certain direction are fabricated by external macroscopic force (F blow) interference introduced by H2 gas flow, leading to superior superhydrophobicity with a water con...

The influence of different application methods on UV protective properties of white and dyed cotton functionalized with ZnO nanoparticles (nano-ZnO) was investigated. The methods differ in application procedure, time of treatment and auxiliaries used in the treating bath. The ultraviolet protection factor (UPF) was determined for untreated and functionalized samples. The presence of nano-ZnO on...

Cu2O nanoparticles were synthesized by thermal treatment in liquid paraffin without any inert gas protection using nano structures of Schiff base copper (II) complex (1) as precursor. Liquid paraffin was used as solvent and reductant. Span 80 was applied to control the morphology of cuprous oxide nanoparticles. The nano structure of the complex was characterized by X-ray diffraction measurement...

With nanotechnology becoming widely used, many applications such as plasmonics, sensors, storage devices, solar cells, nano-filtration and artificial kidneys require the structures with large areas of uniform periodic nanopatterns. Most of the current nano-manufacturing techniques, including photolithography, electron-beam lithography, and focal ion beam milling, are either slow or expensive to...

We investigated the origin of broad luminescence observed from an array of site-controlled InGaN nanodots grown by selective area epitaxy (SAE). Epitaxially grown site-controlled nanodots with lateral dimensions <50 nm and an array density of 10 cm 2 have been studied. During the nanoscale SAE, incorporation of adatoms from the SiO2 mask has greater relative importance, resulting in a non-unifo...

This paper presents the preparation and mechanical properties of compatibilized compositionally graded Polyethylene/ low density polyethylene (LDPE)/ modified montmorillonite (MMT) nanocomposites prepared by solution and melt mixing techniques. Use of polyethylene glycol as compatibilizer improves compatibility of modified montmorillonite and low density polyethylene.  Comparisons between two t...