A powdery product was obtained by the reaction of methylolated melamine with alkyl resorcinols to form melamine-bridged alkyl resorcinols (MARs). The effects of the addition of this powder on the bonding strength and formaldehyde emission of urea–formaldehyde (UF) resins were investigated. Three types of UF resins with a formaldehyde/urea molar ratio of 1.3 synthesized by condensation at pH 1.0...

The objective of this study was to manufacture particleboard made from UF with low formaldehyde (E1) for use in indoor environments. The influence of UF in particles on the formaldehyde emission and its mechanical properties were investigated. The experimental results showed that the formaldehyde emission released decreased linearly with consumption UF-low formaldehyde- particle. Formaldehyde e...

Simultaneous formaldehyde biodegradation, urea hydrolysis and denitrification in anoxic batch assays and in a continuous laboratory anoxic reactor were investigated. In batch assays, the initial formaldehyde biodegradation rate was around 0.7 g CH(2)Og VSS(-1)d(-1) and independent of the urea concentration (90- 370 mg N-NH(2)CONH(2)l(-1)). Urea was completely hydrolyzed to ammonium in the prese...

This paper reports a comparison of adhesion behavior urea-formaldehyde (UF) with those melamine-urea-formaldehyde (MU) resins in bonding wood by analyzing the results published literatures. For this purpose, UF prepared blending low-viscosity resin (LVR) high-viscosity (HVR) at five different and two formaldehyde/urea (F/U) molar ratios (1.0 1.2) was compared MUF synthesized either simultaneous...

A previous study of synthesizing low mole ratio urea–formaldehyde (UF) and urea–melamine–formaldehyde (UMF) resins, which included an acidic reaction step at the beginning of the typical resin synthesis procedure to obtain higher uron-type methylene–ether group contents, was repeated with the acidic reaction step extended to a higher viscosity. Compared to previous resins, the synthesized resin...

Urea-formaldehyde resins modified by melamine were synthesized by four catalysts (H2SO4, HCl, H3PO4, and NaOH/NH4OH) with a F/U/M molar ratio of 1.38/1/0.074. Resin structure and thermal behavior were studied by C-NMR and DSC techniques. For H2SO4, HCl, and H3PO4 catalysts, resins were prepared by two stage pH adjustment: the first pH stage was set at 1.25 (H3PO4 pH 1.60) and second pH stage wa...

In this part of a series of review articles on formaldehyde-releasers and their relationship to formaldehyde contact allergy, formaldehyde-releasers in cosmetics are discussed. In this first part of the article, key data are presented including frequency of sensitization and of their use in cosmetics. In Europe, low frequencies of sensitization have been observed to all releasers: 2-bromo-2-nit...

To upgrade the performance of urea-formaldehyde (UF) resin bonded particleboards, melamine modified urea-formaldehyde (MUF) resins based on strong acidic pH catalyzed UF polymers were investigated. The study was conducted in a series of two experiments: 1) formulation of MUF resins based on a UF polymer catalyzed with strong acidic pH and 2) determination of the effects of increased melamine co...