Abstract In this work, the role of appropriate mixing for mercaptan removal from Kerosene using caustic soda has been investigated in the pilot scale. Static mixer at different condition has been used as a passive mixing tool to achieve proper mixing and consequently high performance of mercaptan removal. Two lengths of static mixer including 20 and 40 cm as well as two pitches 1 and 3 m...

thermal modeling of an automotive cabin was performed in this paper to predict the inside cabin air temperature. to implement this task, thermal and ventilation loads were estimated and the mass and energy balance conservation equations for dry air and water vapor with considering a new parameter (air circulation ratio) as well as the balance equations of internal components of a cabin were der...

the performance of water flooding can be investigated by using either detail numerical modeling or simulation, or simply through the analytical buckley-leverett (bl) model. the buckley-leverett analytical technique can be applied to one-dimensional homogeneous systems. in this paper, the impact of heterogeneity on water flooding performance and fractional flow curve is investigated. first, a ba...

representation and modeling of economic uncertainty is addressed by different modeling methods, namely stochastic variables and probabilities, interval analysis, and fuzzy numbers, in particular triple estimates. fo-cusing on discounted cash flow analysis numerical results are presented, comparisons are made between alter-native modeling methods, and characteristics of the methods are discussed.

An axisymmetric hot closed die-forging process has been studied by physical modeling technique using the plasticine. To observe the material flow pattern, layers of plasticine with different colors were used. The normal direction to the layers was considered a principal direction. The strain distribution was obtained by measuring the thickness of the plasticine layers. Based on the strain distr...

in petroleum production, produced water re-injection (pwri) has earned much interest among disposal methods of the produced water. however, presence of the contaminants in the produced waters usually results in formation damage in well bores and their surrounding fracture systems. in the present study, modeling of external cake formation on a fracture in unsteady-state conditions is discussed. ...

we report engineering experiences from the critical task of relief well installation under high artesian flow conditions at the downstream toe of the karkheh earth dam, iran. due to the establishment of excessive uplift pressure at the downstream toe of the karkheh dam, installation of a series of new relief wells was considered to permanently relieve part of these pressures. the mentioned upli...

design models of multi- stage, axial flow compressor are developed for gas turbine engines. axial flow compressor is one of the most important parts of gas turbine units. therefore, its design and performance prediction are very important. one-dimensional modeling is a simple, fast and accurate method for performance prediction of any type of compressors with different geometries. in this appro...

a numerical model is developed to simulate the transport phenomena in the flow channel between parallel plates with porous and non-porous (or impermeable) walls. the continuity and momentum equations were solved first, assuming the wall reynolds number in the range of with the suction or injection of air at a speed equal to the uniform inlet velocity. the results show that at constant inlet and...