Extremely low permeability due to nano-scale pores is a distinctive feature of gas transport in a shale matrix. The permeability of shale depends on pore pressure, porosity, pore throat size and gas type. The pore network model is a practical way to explain the macro flow behavior of porous media from a microscopic point of view. In this research, gas flow in a shale matrix is simulated using a...

in this work, studies of underground gas storage (ugs) were performed on a partially depleted, naturally fractured gas reservoir through compositional simulation. reservoir dynamic model was calibrated by history matching of about 20 years of researvoir production. effects of fracture parameters, i.e. fracture shape factor, fracture permeability and porosity were studied. results showed that di...

Elemental sulfur (S8) is often present in considerable amounts in sour gas reservoirs at the reservoir conditions (pressure and temperature). For the isothermal conditions in the reservoir, the reduction in reservoir pressure below a critical value will cause the elemental sulfur to deposit in the formation. Sulfur deposition can cause severe loss in the pore space available for gas, and in tur...

more than half of all hydrocarbon reservoirs are naturally fractured reservoirs (nfrs), in which production forecasting is a complicated function of fluid flow in a fracture-matrix system. modelling of fluid flow in nfrs is challenging due to formation heterogeneity and anisotropy. stress sensitivity and depletion effect on already-complex reservoir permeability add to the sophistication. horiz...

In this work, studies of underground gas storage (UGS) were performed on a partially depleted, naturally fractured gas reservoir through compositional simulation. Reservoir dynamic model was calibrated by history matching of about 20 years of researvoir production. Effects of fracture parameters, i.e. fracture shape factor, fracture permeability and porosity were studied. Results show...

the simultaneous flow of oil and water in porous media is described by relative permeability curves, mainly derived from laboratory experiments. relative permeability is of paramount importance in predicting reservoir production performance and drive mechanisms and its value depends largely on the volume fraction of fluids present in the test samples. nowadays x-ray scanners are one of the most...

The effects of an adsorbing phase on the injection of liquid and eventual production of vapor from a lowporosity, vapor dominated geothermal reservoir was studied. The magnitude of delay caused by adsorption, diffusion partitioning, preferential partitioning, and permeability variation were compared. Results were then compared to measured tracer production data at the Geysers to determine the m...

An accurate reservoir characterization is a crucial task for the development of quantitative geological models and reservoir simulation. In the present research work, a novel view is presented on the reservoir characterization using the advantages of thin section image analysis and intelligent classification algorithms. The proposed methodology comprises three main steps. First, four classes of...

[1] In this study, multiscale permeability upscaling is combined with a sensitivity study of model boundary condition to identify an optimal heterogeneity resolution in developing a reservoir model to represent a deep saline aquifer in CO2 storage simulation. A three‐ dimensional, fully heterogeneous reservoir model is built for a deep saline aquifer in western Wyoming, where each grid cell is ...

To provide accurate predictions of flow performance, the numerical model of permeability used by flow simulators must be consistent with all available geological and engineering data. The available data includes core permeability measurements, relevant permeability statistics (particularly, histograms, measures of spatial variability, and correlation with secondary variables such as porosity), ...