Ultrathin (∼3 Å) zirconium oxide films were grown on a single-crystalline Pt3Zr(0001) substrate by oxidation in 1 × 10-7 mbar of O2 at 673 K, followed by annealing at temperatures up to 1023 K. The ZrO2 films are intended to serve as model supports for reforming catalysts and fuel cell anodes. The atomic and electronic structure and composition of the ZrO2 films were determined by synchrotron-b...

This clinical report describes a treatment for the replacement of a missing mandibular anterior tooth using a cantilever single-retainer resin-bonded fixed partial denture (RBFPD), fabricated from zirconium dioxide (ZrO2) ceramic. No clinical complications were observed at the 2-year 6-month follow-up examination after placement of the ZrO2 ceramic RBFPD, and satisfactory functional and estheti...

A facile sol–gel coating procedure has been successfully applied for the ZrO2 coating of eggshell membranes (ESM), resulting in hierarchically ordered thin films with a macroporous network structure comprising crystalline ZrO2 tubes. This hierarchical material, which was obtained through sol–gel mineralization of the ESM template and subsequent calcination at 600 uC, was characterized by XRD, S...

This paper reports the synthesis of CeO2/ZrO2 nanocomposite by wet chemical method using cationic surfactant (CTAB). The properties of the obtained nanocomposites were analysed by X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscoy (SEM), transmission electron microscopy (TEM), UV-Diffuse Reflectance Spectroscopy (UV-DRS) and photoluminescence (PL) spectrosco...

Abstract In this project, nano-ZrO2 particles were dispersed in aluminum powder by a Y-shape mixer. The particle size of ZrO2 powder was < 40 nm and the amount of ZrO2 reinforcement varies from 3 to 15%.The mixed powders were compacted .Subsequently the compacted discs were sintered both in the microwave oven and in the conventional muffle furnace .Using microwave –assisted sintering method led...

This paper studies the feasibility of using flame spray to produce ZrO2 nano-particles using a liquid precursor. The effects of varying precursor concentrations and ratio of diluting medium on the phase composition, size and morphology of ZrO2 nano-particles are discussed. The morphology and size of the ZrO2 nano-particles was very much dependent on the precursor concentration. The solvent rati...

The effects of charging on a ZrO2 sintered body due to electron irradiation were investigated by means of electron holography. The charging effects were quantitatively evaluated as a function of the incident electron density. The ZrO2 sintered body was positively charged within a transmission electron microscope. By means of simulations taking into account reference wave modulation due to a lon...

In this study, novel thermally stable zirconia-containing polyimides (PI/ZrO2) with excellent optical properties have been prepared successfully. The obtained flexible PI/ZrO2 hybrid films revealed excellent optical transparency, a tunable refractive index and an Abbe number up to 1.804 and 32.18, respectively, which are crucial for optical devices. In addition, the PI/ZrO2 hybrid films also ex...

Selective removal of metal cores from core–shell Ag@ZrO2 (ZrO2 coated Ag) and Au@ZrO2 (ZrO2 coated Au) nanoparticles result in stable and freely suspendable oxide nanobubbles of varying dimensions, both in thickness and in diameter. The metal core is removed by a newly found reaction in which halocarbons, generally chlorides, oxidise the metal core and leach out the metal ions. Reduction in the...

Nano-sized, nonreacting, noncoarsening ZrO2 particles reinforced Sn–3.0 wt%Ag–0.5 wt%Cu composite solders were prepared by mechanically dispersing ZrO2 nano-particles into Sn–Ag–Cu solder. The interfacial morphology of unreinforced Sn–Ag–Cu solder and solder joints containing ZrO2 nano-particles with Au/Ni metallized Cu pads on ball grid array (BGA) substrates and the distribution of reinforcin...