The response of amorphous steels to shock wave compression has been explored for the first time. Further, the effect of partial devitrification on the shock response of bulk metallic glasses is examined by conducting experiments on two iron-based in situ metallic glass matrix composites, containing varying amounts of crystalline precipitates, both with initial composition Fe49.7Cr17.7Mn1.9Mo7.4...

The microorganisms Escherichia coli, Enterococcus faecalis and Zygosaccharomyces bailii and an oil-based emulsion, have been subjected to shock compression using the flyer-plate technique to initial pressures of 0.8 GPa (in the suspension). In each experiment, a stainless steel capsule was used to contain the broths and allow for recovery without contamination. Where cavitation was mostly suppr...

Stainless steel particles (60 μm in mean diameter) cladded with an alumina shell (2 μm thick and manufactured by mechanofusion) were sprayed with an Ar-H2 (53-7 slm) d.c. plasma jet (I = 500 A, P = 28 kW, th = 56 %). Two main types of particles were collected in flight, as close as 50 mm downstream of the nozzle exit: particles with a steel core with pieces of alumina unevenly distributed at t...

Clinical isolates of meticillin-resistant Staphylococcus aureus (MRSA), Klebsiella pneumoniae, Pseudomonas aeruginosa, Acinetobacter baumannii, Candida albicans and Mycobacterium tuberculosis (MTB) were tested against copper (Cu) and its alloys. Stainless steel and polyvinylchloride (PVC) were used as controls. The amount of Cu required to inhibit test isolates at room temperature (24 degrees C...

This study examined radiocesium (137Cs) levels in fish from the vicinity of the Department of Energy's Savannah River Site (SRS), a former nuclear weapons production facility in South Carolina. Fish from the Savannah River were sampled above (upstream), along, and below (downstream) the SRS, and from Steel Creek, a tributary that runs through the SRS. There was some off-site contamination of 13...

Hydroforming process is largely used for the production of tubular parts in various industries, and has advantages such as less weight, higher quality, more strength and fewer production cost compared to the conventional methods of production. The aim of this study is forming a tube-shaped part with a special geometry that has both bulge- and T-zones with tube hydroforming process. The forming ...

Friction coefficient and wear rate of different steel materials are investigated and compared in this study. In order to do so, a pin on disc apparatus is designed and fabricated. Experiments are carried out when different types of disc materials such as stainless steel 314 (SS 314), stainless steel 202 (SS 202) and mild steel slide against stainless steel 314 (SS 314) pin. Experiments are cond...