When cutting thick material with an abrasive wateriet, the surface area can be characterized by two texture types. At the top of the cut, the surface texture is smooth. At the bottom, the slurry jet exiting the workpiece forms large striations in the surface. An investigation was conducted to experimentafly determine the influence of the abrasive waterjet cutting parameters on surface texture. ...

the vibratory finishing is one of the important mass finishing processes. this can be applied for finishing many metallic and non- metallic components using abrasive materials such as steel, ceramic, natural materials and etc. the vibratory finishing process is used for some purposes such as surfaces polishing, deburring, oxide layer removing and rounding the edges. evaluation of surface roughn...

Production of abrasive materials includes the stages: covering of abrasive material with wetting agent, addition of binder, i.e. the filler with the binding material, mixing of the components, stabilization to achieve homogeneity of composition, and hardening. The most important processes affecting the properties of the final product are: the coverage of the abrasive materials, mixing, and prop...

The paper discusses the material removal process in refractory ceramics eroded by hydro-abrasive jets. In particular, bauxite, sintered magnesia, and magnesia chromite are eroded. The influence of abrasive particle velocity, local exposure time, abrasive mass-flow rate, and abrasive type is investigated. Erosion depth, specific erosion rate, and geometry of the generated cavities are measured a...

Applied pressure in chemical mechanical polishing CMP is shared by the two-body pad–wafer and the three-body pad–abrasive– wafer contacts. The fraction of applied pressure transferred through the particle contacts is a significant factor as most of the material removal is due to abrasive particles trapped in the pad–wafer interface. In this work, the contact of a rough, deformable pad and a smo...

In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...

In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...

Recently, a comprehensive model has been developed by Luo and Dornfeld (“Material removal mechanism in chemical mechanical polishing: theory and modeling,” IEEE Trans. Semiconduct. Manufact., vol. 14, pp. 112–133, May 2001) to explain the material removal mechanism in chemical mechanical planarization (CMP). Based on the model, the abrasive size distribution influences the material removal from...

in magnetic abrasive finishing (maf), abrasive grains as a tool move on surface and can removechip from surface of work piece. in this study al 6061 tube was considered as the work piece andthe effect of finishing parameters such as gap distance between tube and poles, rotational speed oftube, abrasive ration and finishing time on surface roughness was investigated. the mixture offerromagnetic ...

When an abrasive mixed with a polymer of special rheological properties and forced through a restricting medium, the abrasive and polymer will act as a self forming tool that precisely removes work piece material and improve the surface finish at those areas restricting to the medium flow. It is capable of machining areas which are difficult to reach by conventional machining and can be used to...