OBJECTIVES The purpose of this in vitro study was to evaluate misfit alterations at the implant/abutment interface of external and internal connection implant systems when subjected to cyclic loading. MATERIAL AND METHODS Standard metal crowns were fabricated for 5 groups (n=10) of implant/abutment assemblies: Group 1, external hexagon implant and UCLA cast-on premachined abutment; Group 2, i...

STATEMENT OF PROBLEM For patients with limited interocclusal space, standard height implant abutments may not be usable. Shorter abutments may be desirable. PURPOSE The purpose of this study was to determine the effect of the height of titanium abutments on the tensile strength required to dislodge zirconia copings. MATERIAL AND METHODS Two experimental groups of abutments were prepared: (1...

INTRODUCTION Differences between the tooth and implant response to load can lead to many biological and technical implications in the conditions of occlusal forces. OBJECTIVE The objective of this study was to analyze load distribution in tooth/implant-supported fixed partial dentures with the use of resilient TSA (Titan Shock Absorber, BoneCare GmbH, Augsburg, Germany) abutment and conventio...

SMIP94 Seminar Proceedings Abutment stiffnesses are determined directly from the earthquake motions recorded at the US 1011 Painter Street Overpass using a simple equilibrium-based approach without finite-element modeling of the structure or the abutment-soil systems. The calculated abutment stiffnesses, which include the effects of soil-structure interaction and nonlinear behavior of the soil,...

Statement of the problem Many partially edentulous situations are present whereby the choice between a removable and a fixed partial denture lies within the delicate balance of a single standing abutment. This abutment is called as a pier abutment. If and when a fixed fixed prosthesis is given in such a case, the retainer over the pier abutment acts as a fulcrum and invariably leads to cement f...

PURPOSE To evaluate the implant-abutment interface area and the abutment screw loosening value when diamondlike carbon (DLC)-coated or titanium screws were used before and after cyclic loading. MATERIALS AND METHODS Thirty-six implants were divided into four groups according to the type of connection (external hexagon [EH] or internal hexagon [IH]) and the type of abutment screw (with [EHD/IH...

OBJECTIVES The purpose of this study was to determine the influence of platform switching on stress distribution of two different implant systems using three-dimensional (3D) finite element models. MATERIALS AND METHODS Six 3D finite element models were created to replicate two different implant systems with peri-implant bone tissue, in which six different implant-abutment configurations were...

PURPOSE The aim of this study was to observe stress concentration in the implant, the surrounding bone, and other components under the pull-out force during the crown removal. MATERIALS AND METHODS Two 3-dimensional models of implant-supported conventional metal ceramic crowns were digitally constructed. One model was designed as a vertically placed implant (3.7 mm × 10 mm) with a straight ab...

An abutment for a fixed partial denture may not contain enough tooth structure, such that the abutment does not provide an adequate 'ferrule effect'. A crown or bridge dental prosthesis that is cemented onto such an abutment/s may undergo biomechanical failure. Here, the tooth, core, and post complex, on which the crown is cemented, may fracture off from the abutment, causing the crown to separ...

Fractured abutment screws may be replaced; however, sometimes, the screw cannot be removed and the entire implant must be surgically removed and replaced. The aim of this study was to compare the fracture resistance of abutment retention screws made of titanium, polyetheretherketone (PEEK) and 30% carbon fiber-reinforced PEEK, using an external hexagonal implant/UCLA-type abutment interface ass...