The nanoparticles of templated crosslinked chitosan, was prepared through using ECH as a crosslinker. The nanoparticles exhibited significantly higher adsorption capacities from the congo red dye than other adsorbent formed without a crosslinker. The adsorption of the dyes on the nanoparticles was affected by the initial pH, dye concentration, and temperature. The results were in accordance wit...

In this study the adsorption of Cu (II) ions from aqueous solutions on synthetic zeolite NaA was evaluated. The effect of solution temperature and the determination of the kinetic parameters of adsorption of Cu(II) from aqueous solution on zeolite NaA is important in understanding the adsorption mechanism. Variables of the system include adsorption time, temperature (293328K), initial solution ...

ABSTRACTIn this work, the micro powder was the product of cedar leaf (MPCL) is used as a low-cost adsorbent for the removal of Pb2+ ions from aqueous solutions. Bath experiments were used to determine the best adsorption conditions The adsorption percentage of Pb2+ ions MPCL samples at different initial pH, contact time (tc), adsorbent dosage and temperature (T) were investigated. Effective rem...

The adsorption of Cr(III) in aqueous solution was investigated on a series of ozonised activated carbons, analysing the effect of oxygenated surface groups on the adsorption process. A study was carried out to determine the adsorption isotherms and the influence of the pH on the adsorption of this metal. The adsorption capacity and affinity of the adsorbent for Cr(III) increased with the increa...

Solid waste (SW) from a biodiesel plant has been successfully used for the removal of the hazardous cationic water soluble dye methylene blue (MB) from an aqueous phase. Batch adsorption studies were carried out by monitoring the pH, amount of adsorbent, initial dye concentration and contact time. Attempts have also been made to monitor the adsorption process through Langmuir, Freundlich, Temki...

ch4, c2h6 and c2h4 are the most important outlet gaseous of oxidative couple methane (ocm) reaction and this process is a new technology for conversion of natural gas to ethane and ethylene products. in this study, adsorption of ocm outlet hydrocarbons over 10x zeolite has been examined at equilibrium conditions. temperature and pressure are the most effective operational parameters in the batc...

The use of steel slag in an adsorption process for the removal of thiocyanate has been studied for the first time. Steel slag, a readily available by-product of the steel industry, can be a suitable candidate for the study of the adsorption of thiocyanate found in coke oven effluent. The parameters considered for adsorption studies were pH, initial concentration, temperature, and the amount of ...

in this paper, the adsorption of cerium on modified mesoporous aluminosilicate (with si/al mole ratio of 10) was studied. the effects of ph, contact time, initial concentration of cerium on adsorption of cerium were investigated. the adsorption capacity was high in the ph range of 4-8 and decreases with decreasing of the ph value. the langmuir and freundlich isotherms were applied to represent ...

The work focuses on the removing of Cu(II) from aqueous solution by Linde F(K) zeolite. The zeolite is synthesized from fly ash by hydrothermal process. The adsorption experiments discuss several factors including the optimal solution pH, zeolite dosage, adsorption temperature, adsorption kinetics and adsorption isotherm equation. The results show that, the optima...

In this work, three types of natural clays including kaolinite, montmorillonite, and illite with different molecular structures, as adsorbents, are selected for the removal of methylene blue dye, and their performance is investigated. Also the optimization and the analysis of the dye adsorption mechanism are performed using the response surface methodology, molecular modeling, and experimental ...