This paper describes the theoretical and experimental investigations of the key components and also the performance analysis of a rotary wheel for using as a solid desiccant dehumidifier and also indirect evaporator cooling system. Solid desiccants have long been used in dehumidification and cooling systems for energy efficiency or reduce electricity. Although many mathematical models on th...

Applying corona wind as a novel technique can lead to a great level of heat and mass transfer augmentation by using a very small amount of energy. The enhancement of forced flow evaporation rate by applying electric field (corona wind) has been experimentally evaluated in this study. Corona wind produced by a fine wire electrode charged with positive high DC voltage impinges on water surface an...

In the present work, the drying of calcium carbonate in a batch spouted bed dryer with inert particles has been investigated experimentally. The effect of several operating parameters including air temperature (90, 100, and 110 ˚C), air velocity (Ums, 1.2 Ums, and 1.5 Ums), and dry solid mass (5, 10, 20 g) has been studied. The Taguchi method has been applied to determine the optimal parameters...

knowledge of the aerodynamic properties of agricultural materials is needed in equip-ment design for operations such as pneumatic conveying in loading/unloading operations of corn silage into/from silos. while considerable information is available on seed grains, little is known about the aerodynamic behavior of corn (zea mays l.) silage. in this re-search, the weighed mean terminal velocity of...

the goal of this study was to predict the moisture content of paddy using machine vision and artificial neural networks (anns). the grains were dried as thin layer with air temperatures of 30, 40, 50, 60, 70, and 80°c and air velocities of 0.54, 1.18, 1.56, 2.48 and 3.27 ms-1. kinetics of l*a*b* were measured. the air temperature, air velocity, and l*a*b* values were used as ann inputs. the res...

Computational fluid dynamics (CFD) is potentially a valuable tool for simulating the dispersion of air contaminants in workrooms. However, CFD-estimated airflow and contaminant concentration patterns have not always shown good agreement with experimental results. Thus, understanding the factors affecting the accuracy of such simulations is critical for their successful application in occupation...

The effect of air temperature, air velocity, and sample shapes (circle and square with the same cross-sectional area) on kinetic drying of potato slices in a tunnel dryer was investigated experimentally and a suitable drying model was developed. The experiments of drying of potato slices were conducted at an air temperature of 45-70°C with an air velocity 1.60 and 1.81 m sec(-1). Results showed...

Step changes in air temperature(±20oC) or velocity (±0.8 and ±1.5m/s) were introduced in an air drying process, in relation to standard drying conditions of 70oC and 1.5m/s of air temperature and velocity, respectively. Compared to the standard, the variable conditions caused a clear difference of the moisture content of the dried material and the drying curves deviated significantly after the ...