in this paper, welding feasibility between aa1100, aa5050 and aa6082 aluminum alloys and a441 aisi steel by friction stir welding has been studied. mathematical analysis of the heat generation during process showed that the maximum temperature produced in aa6082 aluminum alloy and a441 aisi joint but heat distribution in aa1100 aluminum alloy was higher than the other alloys. the investigation ...

In this paper, we report the calculated phase diagrams of V-Nb, V-Ta, and Nb-Ta alloys computed by combining the total energies of 40–50 configurations for each system (obtained using density functional theory) with the cluster expansion and Monte Carlo techniques. For V-Nb alloys, the phase diagram computed with conventional cluster expansion shows a miscibility gap with consolute temperature ...

Compared with the conventional manufacturing of aluminum sheet metal, the forming of so called Tailored Heat Treated Blanks (THTB) enables the production of complex aluminum sheet metal parts [1], [2]. The reasons for the lower forming behavior of aluminum alloys are well founded in the material properties. Especially smaller values for uniform elongation (< 30 %) and vertical anisotropy (< 1) ...

7000 series Aluminum alloys are widely used in the automotive industries for structural lightweight components due to their exceptional high strength to weight ratio. However, this class of aluminum alloy is difficult to join by conventional fusion welding techniques so Friction stir welding (FSW) widely is used for welding this alloys. The process has been demonstrated to be effective and is c...

Damage to mechanical components caused by wear is considered to be an important issue for mechanical engineers. For the purpose of wear resistance, it is necessary to improve the material properties of the mechanical elements. Furthermore, low friction plays an important role in saving energy. Hence, it is important to establish a key technology for wear resistance and low friction through appr...

Continuing our work on understanding the oxidation behavior of multiphase composite alloys based on the Mo-Si-B system, we investigated three alloys in the Mo-Si-B system, designated as A1, A2, and A3. The nominal phase assemblages of these alloys are: A1 = Mo5Si3Bx (T1)-MoSi2-MoB, A2 = T1Mo5SiB2 (T2)-Mo3Si, and A3 = Mo-T2-Mo3Si. Our previous work showed that for exposures to 1100°C, all alloys...

in the present work, the effect of aluminum content, austenitizing temperature and austempering time and temperature on the mechanical properties and hardness of fe-c-al grey cast iron was investigated. for this purpose, three alloys containing 1, 2 and 4 weight percent of aluminum were provided. the tensile samples were austenitized at 850?c and 900?c for 120 min, followed by austempering proc...

The rigorous coupled-wave approach was used to compute the plane-wave absorptance of a thin-film tandem solar cell with a metallic surface-relief grating as its back reflector. The absorptance is a function of the angle of incidence and the polarization state of incident light; the free-space wavelength; and the period, duty cycle, the corrugation height, and the shape of the unit cell of the s...

OBJECTIVES The aims of this study were to quantify the metallic ions released by various dental alloys subjected to a continuous flow of saliva and to estimate the nutritional and toxicological implications of such a release. METHODS Four pieces of three nickel-based, one noble, one high-noble and two copper-aluminum alloys were cast and then immersed in a continuous flow of artificial saliva...