The mining chute is an important equipment in the process of coal transportation and coal screening preparation. During the working process, the mining chute will generate a lot of vibration and noise because of constantly friction and impact of gangue and coal blocks. In order to reduce the vibration and noise during the operation of the chute, a new type of foam aluminum laminated structure i...

We demonstrate the experimental realization of a multiresonant metamaterial for Lamb waves, i.e., elastic waves propagating in plates. The metamaterial effect comes from the resonances of long aluminum rods that are attached to an aluminum plate. Using time-dependent measurements, we experimentally prove that this metamaterial exhibits wide band gaps as well as sub- and suprawavelength modes fo...

this study presents a comparison between aluminum and iron plate electrodes on phosphate removal from aqueous solutions by electrocoagulation process. the effectiveness of main operational parameters such as initial ph, initial phosphate concentration and current density were examined. in addition, treated solution and sludge characteristics, energy consumption and electrode mass depletion w...

A new eddy-current system based on low-noise magnetoresistive sensors has been developed to detect cracks and corrosion in thick, multi-layer metal structures. The new instrument has detected narrow slots as short as 6.3 mm, in the lowest layer of a stack of three aluminum plates totaling 25 mm in thickness. These flaws were detected through 19 mm of overlying aluminum, in spite of the presence...

fiber metal laminates are hybrid laminates consisting of thin alternating bonded layers of aluminum and fiber/epoxy. arall (aramid aluminum laminate) and galare (glass fiber reinforced aluminum laminate) are specific kinds of fiber metal laminates that consist of thin aluminum sheets along with kevlar/epoxy and glass/epoxy composite layers, respectively. in this study, nonlinear tensile behavio...

The coupled acoustic-gravity field channel used in this study is schematically illustrated in Fig. 5.1. A lead-zirconate-titanate transducer with 510kHz resonant frequency (170mm-length × 15mm-width × 4.2mm-thick, Fuji-ceramics Inc., Japan) was glued on a 5.00mm-thick Pyrex glass plate using epoxy adhesive. Boat-shaped PTFE spacer (0.8mm-thickness) was sandwiched between the glass plate with tr...

Hypervelocity collisions with space debris (SD, natural meteoroids and man-made artifacts) can significantly affect the performance of spacecraft. Here, I use an adaptivemesh Eulerian hydrodynamic code, Mie-Grüneisen solid-mechanics, and a simple material-failure model, running on a modern PC, to analyze the protection afforded by a nominal two-plate aluminum shield to hypervelocity collisions ...

PURPOSE The purpose of this study was to investigate appropriate contrast reference values (CRVs) by comparing the contrast in phantom and clinical images. MATERIALS AND METHODS Phantom contrast was measured using two methods: (1) counting the number of visible pits of different depths in an aluminum plate, and (2) obtaining the contrast-to-noise ratio (CNR) for 5 tissue-equivalent materials ...

A numerical and experimental investigation of flow and heat transfer in a gas- liquid Thermosyphon Heat Exchanger "THE" with built in heat pipes and aluminum plate fins for moderate Reynolds numbers has been carried out. It's module is composed of 6 rows and 15 columns copper pipes with aluminum plate fins with dimensions of 130cm height, 47cm width and  20cm depth. The tubes have been fill...

friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized al2o3 and micro sized graphite particles. a mixture of al2o3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. packed groove was subjected to friction stir processing in order to im...