In situ neutron diffraction experiment was used during tensile testing at room temperature to examine the changes on the percentage and texture of both ferrite and austenite in a nanocrystalline bainitic steels transformed at two different temperatures 200°C and 300oC for different times to achieve the same phase percentages. Both samples showed an inadequate capability of austenite to transfor...

Local electron work function, adhesive force, modulus and deformation of ferrite and austenite phases in a duplex stainless steel were analyzed by scanning force microscopy. It is demonstrated that the austenite has a higher electron work function than the ferrite, corresponding to higher modulus, smaller deformation and larger adhesive force. Relevant first-principles calculations were conduct...

The combined influence of prior plastic strain in the austenite, and applied stress in the course of the transformation, on the crystallographic texture of a bainitic steel was studied in this work. The experimental data were obtained using Electron Back Scatter Diffraction (EBSD) method and analyzed using two methodologically different approaches. It was concluded that the plastic deformation ...

Recent research suggests that extraordinary combinations of strength and ductility can be achieved in the so–called δ–TRIP steels, which contain ferrite, bainite and austenite. A part of the reason for the ductility of almost 40% elongation at a strength of some 900MPa, is believed to be the optimal stability of the austenite to plastic deformation. We demonstrate here that mechanical stabilisa...

The carbon concentration trapped in films of austenite between parallel platelets of bainite is often found to be much larger than that in the larger blocks of austenite between sheaves of bainite. The effect of this non-uniform distribution of carbon on the overall transformation kinetics of bainite is examined theoretically. It is found that the trapping of carbon in the films of austenite ac...

Coarse crystals of martensite can form by the coalescence of thin individual platelets of martensite under appropriate circumstances. Although these coarse grains are essentially single crystals, there exist significant orientation gradients across their dimensions. It is demonstrated that these gradients arise because of the plasticity induced in austenite due to the transformation strain asso...

Lath martensite reveals a specific hierarchical subgrain structure, with laths, blocks and packets of particular crystallography. The presence of interlath retained austenite layers has been reported in the literature. This paper investigates the potential influence of the interlath retained austenite on the mechanical behaviour of lath martensite subgrains. To this purpose, a martensite grain ...

This study was conducted in order to investigate the influence of plastic deformation on the transformation of retained austenite in a TRIP steel with a high content of Al and a low content of Si. To the aim, appropriate treatments were used to produce the starting material (TRIP steel). The microstructure of the obtained steel was composed of bainite and phases including ferrite and retained a...

The present paper is concerned to the theoretical and experimental study of the growth kinetics of allotriomorphic ferrite in medium carbon vanadium-titanium microalloyed steel. A theoretical model is presented in this work to calculate the evolution of austenite-to-allotriomorphic ferrite transformation with time at a very wide temperature range. At temperatures above eutectoid temperature, wh...

an artificial neural network (ann) model is developed for the analysis, simulation, and prediction of the austenite reversion in the thermo-mechanical treatment of 304l austenitic stainless steel. the results of the ann model are in good agreement with the experimental data. the model is used to predict an appropriate annealing condition for austenite reversion through the martensite to austeni...