Air motion inside the intake manifold is one of the paramount factors, which govern the engine performance of multi-cylinder petrol engines. Hence the flow phenomenon inside the intake manifold should be fully understood in order to consider the current requirement of higher engine efficiency. In this paper, the internal flow characteristics in the intake manifold of a four cylinder petrol engi...

An air flow meter for measuring the intake air of an automobile engine is presented. It is based on a miniaturized silicon thermal mass flow sensor using a thick porous Si (Po-Si) layer for local thermal isolation from the Si substrate, on which the sensor active elements are integrated. The sensor is mounted on one side of a printed circuit board (PCB), on the other side of which the readout a...

one of the methods to reduce the emissions in a diesel engine is by oxygen introduction into the combustion chamber which can be done by supplying the oxygen into the inlet manifold during suction stroke. oxygen affects different parameters such as brake thermal efficiency, fuel consumption, nox and smoke at different load conditions. load test was conducted for various concentrations of oxygen...

Using a structural model of demand for automobile engine variants, this paper finds that there is second-degree price discrimination: markups increase with engine size. Still, average markups are lower than when models have just one engine. The paper develops the first empirical demand framework suitable for markets with variants. There is an unobserved product characteristic and a consumer-spe...

Cooled exhaust gas recirculation is emerging as a promising technology to address the increasing demand for fuel economy without compromising performance in turbocharged spark injection engines. The objectives of this study are to quantify the increase in knock resistance and to decrease the enrichment and emission at high load. For this purpose four stroke turbo charged Spark Ignition engine (...

A methodology to study the sound radiation of engine valve covers is presented. The analysis process uses a nonlinear static simulation followed by a steady state dynamics simulation to determine the sound pressure field due to the vibration of the engine cover. The effects of assembly loads are included. The methodology is demonstrated with two representative engine valve covers using acoustic...

This article introduces the theory behind digital order tracking, which is implemented by oversampling, interpolation and resampling techniques in Brüel&Kjær instrumentation. As application examples order tacking is applied to the vibration signal from a coast down of a turbogenerator from a power plant station, a run-up of a large marine diesel engine, gated measurement on an automobile engine...

The exhaust system has a number of requirements to fulfil. The major ones are to reduce the noise level created by the engine, to channel the waste gases out the rear of the automobile, to minimize the reduction in engine performance, and to have an acceptable service life and cost1. The exhaust system is divided into two main parts, the hot end and the cold end. The components comprising the h...

This review paper contains the basic concept of intake manifold. Intake manifold is the breathing system of the car engine which supplies air to the engine cylinders where the combustion of the fuel occurs. The review paper contain SAE is the society of automotive engineers which is working for the automotive industry, educators and students. SAE India organizes formula student car racing champ...

Only a limited amount of work has been done on issues of optimum experimental design in hierarchically structured data, in spite of the importance of design efficiency. We illustrate these issues by a fresh analysis of Holliday’s well-known engine mapping experiment. This experiment investigated the relation of automobile engine performance, as measured by engine torque vs. spark advance, to ad...