Binary polyvinylidene fluoride/barium titanate(PVDF/BaTiO3) and its nanographite (GN) doped ternarynanocomposites were fabricated using a simple solution casting process followed by compression molding. The dielectricbehavior of such hybrids over a wide frequency range was studied. Additions of GN with contents close to the percolationthreshold were found to be very effective to...

Titania films have been grown on polycrystalline BaTiO3 (BTO) substrates at 7001C by pulsed laser deposition. Electron backscatter diffraction (EBSD) was used to determine grain orientations in the substrate before growth, and the phase and orientation of the supported films after growth. All BaTiO3 grains within 261 of (001) were covered by anatase films with an orientation relationship of (00...

The influence of small ferroelectric BaTiO3 particles on the planar-homeotropic transition threshold voltage in smectic A liquid crystals consisting of p-nitrophenyl p-decyloxybenzoate and 4-cyano-4'-pentylbiphenyl were studied by using capacitance-voltage (C-V) measurements. It was shown that the BaTiO3 particles significantly reduce the threshold voltage. The obtained result is explained by t...

BaTiO3-CoFe2O4 composite films were prepared on (100) SrTiO3 substrates by using a radio-frequency magnetron co-sputtering method at 750 °C. These films contained highly (001)-oriented crystalline phases of perovskite BaTiO3 and spinel CoFe2O4, which can form a self-assembled nanostructure with BaTiO3 well-dispersed into CoFe2O4 under optimized sputtering conditions. A prominent dielectric perc...

The piezoelectric generation of perovskite BaTiO3 thin films on a flexible substrate has been applied to convert mechanical energy to electrical energy for the first time. Ferroelectric BaTiO3 thin films were deposited by radio frequency magnetron sputtering on a Pt/Ti/SiO2/(100) Si substrate and poled under an electric field of 100 kV/cm. The metal-insulator (BaTiO3)-metal-structured ribbons w...

Fiberglass-reinforced polymer composites were investigated for potential use as structural dielectrics in multifunctional capacitors that require simultaneous excellent mechanical properties and good energy storage characteristics. Composites were fabricated employing poly(methyl methacrylate), PMMA, as the structural matrix. While barium titanate (BaTiO3) nanopowder was added to the composites...

Biaxial compressive strain has been used to markedly enhance the ferroelectric properties of BaTiO3 thin films. This strain, imposed by coherent epitaxy, can result in a ferroelectric transition temperature nearly 500 degrees C higher and a remanent polarization at least 250% higher than bulk BaTiO3 single crystals. This work demonstrates a route to a lead-free ferroelectric for nonvolatile mem...

Layer transfer of BaTiO3 thin films onto silicon-based substrates has been investigated. Hydrogen and helium ions were co-implanted to facilitate ion-implantation-induced layer transfer of films from BaTiO3 single crystals. From thermodynamic equilibrium calculations, we suggest that the dominant species during cavity nucleation and growth are H2, H +, H2O, Ba 2+ and Ba–OH, and that the additio...

Self-assembled BaTiO3–CoFe2O4 complex oxide nanostructures have been synthesized by pulsed laser deposition. A single ceramic target with a molar ratio of 0.62BaTiO3–0.38CoFe2O4 was used. Spinel CoFe2O4 and perovskite BaTiO3 phases spontaneously separated during heteroepitaxial growth on a single-crystal SrTiO3 s001d substrate. The nanostructures are epitaxial in-plane as well as out-of-plane, ...

Based on first-principles calculations, we demonstrate the impact of the electric polarization on electron transport in ferroelectric tunnel junctions (FTJs). Using a Pt/BaTiO3/Pt FTJ as a model system, we show that the polarization of the BaTiO3 barrier leads to a substantial drop in the tunneling conductance due to changes in the electronic structure driven by ferroelectric displacements. We ...