In this research, the removal of Reactive Red 198 dye (RR-198) by Cuttlefish bone powder was investigated. The adsorbent was prepared in laboratory conditions and ground by ASTM standard sieves (60-100 mesh). The progress of the process is monitored spectrophotometrically by measuring the absorbance of dye at 518 nm wavelength. In addition, the effects of process parameter...

In this study, montmorillonite clay was used as the adsorbent for the removal of Aniline Blue dye, from aqueous solution by the batch adsorption technique under different conditions. The maximum removal of aniline blue dye for initial dye concentration 20 mg/L was more than 95% at optimum conditions (pH=4.5, contact time=30 min, and adsorbent dosage=2 g/L). The data of this study were fitted wi...

background: in this study, adsorbentn process performance was assessed using nickel oxide nanoparticles for wastewater treatment containing mono azo orange ii dye in a laboratory scale. methods: the effects of various factors such as adsorbent dosage, contact time, ph and initial dye concentration were investigated. findings: based on the obtained results, the optimum ph range to dye removal is...

The effects of N-methylphenazonium methosulfate (PMS) have been compared with three other phenazine dyes and N, N, N’, N’-tetramethyl-&phenylenediamine (TMPD). All accelerate the recovery of the initial absorbance changes in Rhodospirillum rubrum extracts induced by a lO+ec flash, although only N-ethylphenazonium ethosulfate and TMPD stimulate photophosphorylation to the same extent as PMS. N-E...

biosorption of acidic dyes using the live fern azolla filliculoides was studied in a discontinuous system. dye parameters, dye initial concentration and contact time were studied in temperature range of 25-30 ?c and ph=7. it was shown that increasing the 23initial concentration of dye and its contact time resulted in decreasing the dye taking quantity by the absorbent. also, type of dye has an ...

The effects of N-methylphenazonium methosulfate (PMS) have been compared with three other phenazine dyes and N, N, N’, N’-tetramethyl-&phenylenediamine (TMPD). All accelerate the recovery of the initial absorbance changes in Rhodospirillum rubrum extracts induced by a lO+ec flash, although only N-ethylphenazonium ethosulfate and TMPD stimulate photophosphorylation to the same extent as PMS. N-E...

Adsorbent prepared from waste plants for the treatment of dyeing effluents have high significance in environmental sustainability. In this research, adsorption of Acid Blue 92AB 92 dye from aqueous solutions on raw and modified diatomite nickel oxide nanoparticles was studied. The effect of different operation parameters such as pH, contact time, initial dye concentration, calcinations and sorb...

halophilic and halotolerant microorganisms are good candidates for decolorization of azo dyeswhich are routinely used in the dyeing process in textile industries. in this paper, theoptimization of biological decolorization of synthetic dye solutions containing remazol black bby the previously isolated halophilic bacterium halomonas sp. d2 is investigated. in a primaryinvestigation using a one-f...

In the present study the treatment efficiency of O3 and UV+O3 processes were compared for the oxidation of simulated dyebath effluent containing a mixture of a reactive dye (C.I. Reactive Blue 19) and various dye auxiliary chemicals. The color, COD and TOC removal rates were assessed for different processes. The effect of initial dye concentration and presence of sodium hydroxide and sodium car...

Dye-containing wastewater is one of the main environmental challenges that can cause health issues. It is crucial to remove the dyes from wastewater before its discharge into the environment. This study aims to evaluate the efficiency of aptenia cordifolia mucilage in removal of anionic dyes from textile wastewater via coagulation and flocculation process. To this goal, the effect of different ...