Cement-based materials are fundamental resources used to in construction. The increase in requests for and consumption of cement products, especially in Iran, indicates that more cement plants should be equipped. This study developed a geographical information system using pairwise comparison based on grey numbers to identify potential sites in which to set up cement plants. A group of five exp...

The rheological properties of blended cement-based materials depend strongly on mixture proportions and the characteristics of the components. In this study, design of experiments is used to investigate the influence of three variables (cement particle size distribution (PSD), fly ash PSD, and ratio of fly ash to cement) at each of four levels on the yield stress and viscosity of blended pastes...

Bone deficiency hinders implant alignment and stabilisation of the bone-implant interface in revision total knee arthroplasty (TKA). Treatments for bone defects include bone cement, bone cement with screw reinforcement, metal augments, impaction bone grafts, structural allografts, and tantalum, depending on the location and size of the defects. Small defects are usually treated with cement, cem...

This paper explores image analysis techniques that provide insight into the nature of pore structure as observed in backscattered electron images of polished sections. On the basis of mathematical morphology, the pore size distribution is characterised and the critical pore size is determined for cement paste at different hydration time. The influence of image resolution is investigated. The pe...

This study comparably assessed the pozzolanic effect of silica fume (SF) and ground rice husk ash (RHA) as supplementary cementing materials on the properties of blended cement pastes and concretes. A commonly commercial silica fume (SF) and locally-produced rice husk ash (RHA) samples with two finenesses (one with larger size than cement and the other with smaller size than cement) were used i...

The main problem with cement composites is that they have structural defects, including cracks, holes, and a disordered morphology, which significantly affects their strength and durability. Therefore, the construction of cement composites with defect-free structures and high strength and long durability is an important research topic. Here, by controlling the size and chemical groups of graphe...

After cemented total hip arthroplasty (THA) there may be failure at either the cement-stem or the cement-bone interface. This results from the occurrence of abnormally high shear and compressive stresses within the cement and excessive relative micromovement. We therefore evaluated micromovement and stress at the cement-bone and cement-stem interfaces for a titanium and a chromium-cobalt stem. ...

In this paper, the effects of carbonation on pore structure of blended pozzolan cement pastes were investigated. Ordinary Portland cement OPC was partially replaced with ground palm oil fuel ash POA , ground rice husk ash RHA and classified fine fly ash FA . The strength, total porosity, specific surface area, and pore size distribution were tested. In general, incorporation of pozzolans increa...

The properties of graphene oxide (GO)-based cement paste can be significantly affected by the state of GO dispersion. In this study, the effects of uniformly dispersed and re-agglomerated GO on the rheological, mechanical properties and microstructure of cement paste were systematically investigated. Two distinct dispersion states can be achieved by altering the mixing sequence: Polycarboxylate...