In this paper, the simplified local density (SLD) theory is combined with the ESD equation of state to study the adsorption of solutes from supercritical carbon dioxide onto activated carbon. Firstly the model was applied to fit the adsorption of toluene+CO2 and benzene+CO2 by using only two temperature-independent parameters. It was shown that this theoretical model is capable of describing th...

A modified two-dimensional van der Waals equation model was proposed for the prediction of multicomponent gas-solid adsorption isotherms from corresponding single-component adsorption equilibrium data. The model was used to predict adsorption isotherms of CO-CO2 mixtures and CO2-N2 mixtures on Cu(I)-NaY zeolite. Experimental adsorption equilibrium data of the two systems were compared with resu...

volumetric techniques were employed to study the adsorption of co2 on a purified multi-wall carbon nanotubes (mwnt’s) sample, as a mesoporous material, at isothermal conditions of 288, 293 and 298 k and pressures ranging from 30 to 150 kpa. langmuir, freundlich and sips equations were used to represent the isotherms. also the parameters of these fitted isotherm models have been determined. the ...

Several reactions, known from other amine systems for CO2 capture, have been proposed for Lewatit R VP OC 1065. The aim of this molecular modeling study is to elucidate the CO2 capture process: the physisorption process prior to the CO2-capture and the reactions. Molecular modeling yields that the resin has a structure with benzyl amine groups on alternating positions in close vicinity of each ...

A series of polyethyleneimine (PEI) incorporated MIL-101 adsorbents with different PEI loadings were reported for the first time in the present work. Although the surface area and pore volume of MIL-101 decreased significantly after loading PEI, all the resulting composites exhibited dramatically enhanced CO2 adsorption capacity at low pressures. At 100 wt% PEI loading, the CO2 adsorption capac...

We present experimentally measured adsorption isotherms of CO2, H2, and N2 on a phenol-formaldehyde resin-based activated carbon, which had been previously synthesized for the separation of CO2 in a precombustion capture process. The single component adsorption isotherms were measured in a magnetic suspension balance at three different temperatures (298, 318, and 338 K) and over a large range o...

Adsorbents prepared easily by impregnation of fumed silica with polyethylenimine (PEI) are promising candidates for the capture of CO2 directly from the air. These inexpensive adsorbents have high CO2 adsorption capacity at ambient temperature and can be regenerated in repeated cycles under mild conditions. Despite the very low CO2 concentration, they are able to scrub efficiently all CO2 out o...

The CO2 capture performance of four zeolitic imidazolate frameworks (ZIFs), ZIF-10, ZIF-71, ZIF-68 and ZIF-69, was investigated in the presence of SO2 using molecular simulations. Our results show that SO2 is preferentially adsorbed over CO2. However, it also shows a cooperative effect on CO2 adsorption. In ZIF-10 and ZIF-71, the SO2 presence was found to have almost no effect on CO2 adsorption...

differential scanning calorimetry (dsc), temperature programmed desorption mass spectrometry (tpd-ms) and small angle neutron scattering (sans) were used to investigate co2 uptake by the wyodak coal. adsorption of carbon dioxide on wyodak coal was studied by dsc. the exotherms evident at low temperatures are associated with the uptake of co2 suggesting that carbon dioxide interacts strongly wit...

Solid-state post-combustion CO2 sorbents have certain advantages over traditional aqueous amine systems, including reduced regeneration energy since vaporization of liquid water is avoided, tunable pore morphology, and greater chemical variability. This report includes two parts, i.e., the design and synthesis of nitrogen-doped porous carbons as CO2 sorbents and the development of a robust tech...