pervious concrete is a concrete mixture prepared from cement, aggregates, water, little or no fines, and in some cases admixtures. the hydrological property of pervious concrete is the primary reason for its reappearance in construction. much research has been conducted on plain concrete, but little attention has been paid to porous concrete, particularly to the analytical prediction modeling o...

the effects of adding nano-silica particles on the compressive strength and water permeability of concrete and its comparison with that of micro-silica were investigated in this work. the effect of combination of nano- silica and micro-silica were also studied in this work, which resulted in an increase in compressive strength of concrete in comparison with other concrete specimens tested in th...

abstract statement of problem: the ph of the human abscess has been measured as low as 5.0. this low ph could potentially inhibit setting reactions, affect adhesion, or increase the solubility of root end filling materials hence affect the compressive strength. moreover, root end filling materials might expose or even mix with lidocaine hcl during periapical surgery. objectives: the aim of this...

Lightweight yet stiff and strong lattice structures are attractive for various engineering applications, such as cores of sandwich shells and components designed for impact mitigation. Recent breakthroughs in manufacturing enable efficient fabrication of hierarchically architected microlattices, with dimensional control spanning seven orders of magnitude in length scale. These materials have th...

The correlation between the strength at the macroscale and the elastic deformation as well as shear cracking behavior at the microscale of bulk metallic glasses (BMGs) is investigated. The temperatures of 298 K and 77 K as well as the strain rate ranging from 10(-6) s(-1) to 10(-2) s(-1) are applied to the BMGs, in which the mechanical responses of the BMGs are profiled through the compression ...

One of the major challenges of our present society is the protection of environment; with respect to this some of the important elements are reduction of natural raw materials and consumption of waste materials. The recycled aggregate sample of size 20mm which is the maximum size of aggregate in reinforced cement concrete is collected from demolished structures in our surrounding areas and the ...

This paper describes an examination of the development of tension lap splices in high-strength concrete and the applicability of the restriction in the ACI 318 code where the values of √fc′ used to calculate development length shall not exceed 100 psi. The focus is on the development of splices with Grade 60 epoxy-coated and uncoated bars in normalweight concrete. A summary of the behavior of b...

An investigation was conducted to determine the influence of recycled scrap tire rubber on the engineering properties of controlled low strength material (CLSM). With control over the ultimate compressive strength of CLSMs being key for applications such as backfilling utility trenches where re-excavation is often necessary, incorporation of scrap tire rubber into the CLSM mixture is a viable w...

Electrical resistivity measurement of freshly prepared uncured and cured soil-cement materials is done and the correlations between the factors controlling the performance of soil-cement and electrical resistivity are discussed in this paper. Conventional quality control of soil-cement quite often involves wastage of a lot of material, if it does not meet the strength criteria. In this study, i...

The flexural behaviour of concrete containing Foamed glass as partial replacement of coarse aggregate is investigated. The coarse aggregate was replaced with 0%, 25%, 50%, 75% and 100% Foamed glass. All other constituents were maintained the same. Reinforced concrete beams were cast using 2 bars of 8mm in diameter in the tensile zone. The density and compressive strength of concrete decreased a...