Constituents from products that are used in the flooring on a concrete slab such as carpets of plasticised PVC and water-based adhesives sometimes degrade in an alkaline and humid environment. The concrete itself could be such an environment. In order to examine the effect of different levels of alkalinity and humidity on the mentioned products a specialised procedure was developed. By this pro...

The objective of this study was to quantify the early-age Portland Cement Concrete (PCC) slab deformations due to pure environmental loading at critical periods immediately following construction. A newly constructed Jointed Plain Concrete Pavement ( JPCP) section on highway US-30 near Marshalltown, Iowa, USA was instrumented to monitor the pavement response to variations in temperature and moi...

The paper is intended to deal with a certain failure of a floor slab type, which was favored in the beginning of the 20 century in Hungary. The main features are: between skeleton ceramic filling elements in situ reinforced concrete beams are prepared during the construction of the relatively narrowly spaced RC beamed slabs. In the studied cases mainly due to the pure workmanship of concrete co...

Reinforced concrete stair slabs with mid landings i.e. Dog-legged shaped are conventionally designed as per specifications of standard codes of practices which guide about the effective span according to the varying support conditions. Presently, the behavior of such slabs has been investigated using Finite Element method. A single flight stair slab with landings on both sides and supported at ...

This paper evaluates the behavior of channel shear connectors, embedded in a concrete slab, with different concrete materials. The results of a series of limited push-out specimens were presented and discussed. The push-out tests comprise of channel shear connectors in different types of concrete. Reinforcement was included in some specimens, as well. The results showed that using reinforcement...

A research study was undertaken to assess performance of flat plate systems constructed with slab shear reinforcement under dynamic loads. The research program consisted of shake table tests and accompanying analytical studies of two, approximately one-third scale, two-story, two-bay, slab-column frames. One specimen was constructed with reinforced concrete (RC) slab, whereas the other specimen...

in this paper, evaluation of torsional stiffness in beam and slab bridge deck elements is presented. a beam and slab bridge decks structurally behave as a grillage. a grillage has an efficient transverse load distribution due to transverse asymmetric load. in the case of bridge deck without transverse beams in the span, transverse load distribution depends on the torsional stiffness of longitud...

This study evaluates the fire resistance performance (1–2h) of a reinforced concrete (RC) structure-void slab using a lightweight hollow sphere, which can reduce the unnecessary dynamic of removing the central concrete. For this experiment, we set up the depth of the concrete cover, live load, and span length as the factors. The result comes out with 50 mm cover depth of the RC structure hollow...

Steel fiber reinforced concrete (SFRC) is used for slabs on grade such as pavements, industrial floors, airport runways, since it exhibits excellent isotropic mechanical properties. When mixing the fibers with the fresh concrete, care is taken to obtain a uniform distribution and a random orientation of the fibers. The strength of this concrete primarily depends on the fiber content, hence it i...

The present paper deals with a feasibility study of Compton scattering technique for inspection of concrete structures for the detection of local defects and the discrimination between materials of different density and composition, such as concrete, void and steel. The experimental setup consists of a Cs radioactive source and a HPGe planar detector providing high resolution energy dispersive ...