In machining to improve machinability, productivity and to extend tool life coolants and lubricants where used .Increasing industry the use of cutting fluids subsequently increasing this leads in reduce of living conditions nearby future all the governments recommend the manufacturers to reduce the usage of toxicity cutting fluids. Still research for dry machining challenge is exiting for the i...

A flex hose assembly containing aqueous coolant from the International Space Station (ISS) Internal Active Thermal Control System (IATCS) consisting of a 2 foot section of Teflon hose and quick disconnects (QDs) and a Special Performance Checkout Unit (SPCU) heat exchanger containing separate channels of IATCS coolant and iodinated water used to cool spacesuits and Extravehicular Mobility Units...

The thermal performances of a minichannel heat sink are experimentally investigated for cooling of electronics using nanofluid coolant instead of pure water. The Al2O3–H2O nanofluid including the volume fraction ranging from 0.10 to 0.25 vol.% was used as a coolant. The effects of different flow rates of the coolant on the overall thermal performances are also investigated. The flow rate was ra...

Effective heat transfer is essential for fusion power core components in order to enable the maximum possible power density and power conversion efficiency needed for economic competitiveness and fuel conservation. Helium coolant is particularly attractive for fusion power plant applications due to its inherent safety features. It can be used in conjunction with a refractory metal such as tungs...

A new numerical model has been developed for the simulation of pate-fin-tube type of cooling and dehumidifying coils widely used in the air conditioning industry. The model discretizes the coil into nodes along the coolant path and carries out repetitive marches from the coolant inlet to its outlet while simultaneously updating the values of the air stream properties for obtaining quick converg...

It has been found that using a segmented grinding wheel with a fluid chamber can significantly minimise the quantity of coolant while improving the ground surface integrity. The present investigation aims to explore the fluid flow mechanism in such a wheel system. To this end, the Weber theory for Newtonian jet instability was applied to quantitatively determine the contribution of coolant flow...

This report provides results recorded from the application of a coalescing plate separator to grinding and lathe coolant filtration. Use of the filter and normal recommended practices in monitoring coolants significantly extended coolant life, increased the tool life of carbide inserts and grinding wheels an average of 25'10, and resulted in cleaner machines and coolant sumps. The use of deioni...

Decortication of bone with a high-speed burr in the absence of coolant may lead to local thermal necrosis and decreased healing ability, which may negatively impact clinical outcome. Little data are available on the impact of applying a coolant during the burring process. This study aims to establish an in vitro model to quantitatively assess peak temperatures during endplate preparation with a...

A breeding blanket design for the tritium production ICF reactor SIRIUS-T is presented. The blanket consists of alternating layers of beryllium multiplier and lithium breeder/coolant with vanadium alloy structure. A tritium breeding ratio of 1.9 can be achieved for the optimum layered configuration with lithium enriched to 90% 6Li. An optimum coolant routing scheme is utilized to achieve adequa...

The objective of the study was to evaluate the degree of temperature change in the bone, directly adjacent to the implant site during the abutment part of one-piece implants, during procedures involving different cutting techniques. Three different one-piece implants: Osteoplant, Nobel Direct, Q-implant were cut with air-turbine burs after insertion in fresh pig ribs. Tests were performed with ...