Water distribution networks comprised of underground reinforced concrete pipes deteriorate with time due to environmental conditions, such as chloride-induced corrosion and differential soil movements [1]. If the pipes in these networks are not periodically replaced, they will eventually fail. Strategies for replacement for these pipes depend on 1) the risks associated with failure of a water d...

Precise causes of water quality failures are often difficult to pinpoint. The complexity of the distribution system (many kilometers of pipes of different materials and ages), occurrences of physical/chemical/biological processes and the lack or absence of timely data make forensic analyses of water quality failure events very challenging. Water quality failure in the distribution system can oc...

The aim of this paper was to study the influence of microbial biofilms on the high copper levels measured in the drinking water of rural houses. Drinking water parameters and copper pipe surfaces were analysed in the copper plumbing systems of rural and urban houses. The water in rural houses had pH values of 6.2 and alkalinity values of 63mg/L as CaCO3, whereas in urban houses the pH values we...

Gas pipe failure caused by inner corrosion defects is one of the risk factors for the unscheduled shutdown of a plant. The pipes must be inspected to reduce the risk, but this requires a great amount of time and money, since gas pipes are quite long. This research proposes a screening method for the efficient inspection of gas pipes caused by aqueous corrosion. This screening method consists of...

High-temperature pressure pipelines are extensively used in petrochemical plant and power stations. Severe pits or wall loss defects can be internally produced after a certain period of time due to media corrosion and cavitation erosion. These defects finally lead to leakage of the pipes. In order to search for a good non-destructive method for these defects, a large pipe testing installation w...

Internal corrosion is a common problem in pipelines transporting oil and gas containing corrosive components such as CO2 and H2S. In many mature oil wells, the water cut and CO2 content may reach high level which forms a suitable environment for initiation and growth of corrosion. To avoid the consequences of corrosion, process parameters should always be controlled within safe operating limits...

Many water companies are adding low concentrations of orthophosphate to the water supply in order to reduce lead concentrations in drinking water produced from corrosion of lead service pipes. Despite the erratic nature of lead concentrations measured at customer properties it has been possible to quantify the impact of treatment on lead concentrations and thereby quantify the effectiveness of ...