An active approach for initiating rigidization in carbon-fiber reinforced polymer (CFRP) composites unites electrical resistivity to mechanical stiffening. Temperature control is implemented in efforts to reduce the curing time of the composite and to increase control of the curing process. Specifically, proportional-integral (PI) feedback control of internal resistive (Joule) heating establish...

AIM The aim of this study was to investigate the influence of light curing method, composite shade, and depth of cure on composite microhardness. METHODS AND MATERIALS Forty-eight specimens with 4 mm of depth were prepared with a hybrid composite (Filtek Z-100, 3M ESPE); 24 with shade A1 and the remaining with shade C2. For each shade, two light curing units (LCUs) were used: a quartz-tungste...

Objectives: The aim of this study was to compare polymerization depth of two bulk-fill and one conventional composite cured for different times. Methods: This in vitro experimental study was conducted on 54 composite samples (2×4×10mm) fabricated of Tetric N-Ceram bulk-fill, x-tra fil bulk-fill, and Grandio conventional composite cured for 20, 30, and 40 seconds. The microhardnes...

Aim and objectives: To determine the shear bond strength of laser cured composite resin and compare with that of visible light cure resin and evaluate it’s clinical usefulness. Materials and methods: An argon laser with a wavelength of 488-500nm and a power density of 2.10 mW/cm and an optical diameter of 6mm with a curing time of 10 seconds was employed as against the visible light cure with a...

In modern research, development of monomers that reduce shrinkage of composite materials remains an ongoing quest and perennial challenge. The purpose of this study, therefore, was to analyze the shrinkage behaviour of an innovative composite material for dental restorations based on a monomer with a new chemical formulation, known as silorane. To this end, shrinkage stress development during c...

Curing cycle has a strong impact on the thermal and mechanical behavior of thermosetting polymers. The extent of cross-linking which is a strong function of curing temperature and time is directly linked to the glass transition temperature (Tg) of the thermosetting polymer. This transition temperature speaks about the transformation of the polymer from glassy state to rubbery state, hence decid...

in this work, leather fibers were employed as a component of elastomeric compounds based on nbr, cr and epdm and studied were made on their effects upon curing characteristics and mechanical properties of the prepared compounds. evaluation of curing characteristics of the compounds demonstrated that leather fibers have no considerable effect on initial viscosity and curing time of the compounds...

THE EFFECT OF THE BLUE LIGHT DIODE LASER ON SHEAR-PEEL BOND STRENGTH OF ORTHODONTIC BRACKETS WITH VARYING CURING TIME AND DISTANCE Kamran Shaikh, DDS June 17,2010 Background: Light cured composite resin can be time consuming for bonding orthodontic brackets. A new Blue light diode laser may reduce curing times for composite resins. Hypothesis: The laser will achieve similar bond strengths in ha...

Objective: To assess a multiple emission peak light-emitting-diode (LED) light-curing unit (LCU) by measuring the polymerization efficiency through the degree of conversion (DC) and Knoop microhardness (KH) of a resin-based pit and fissure sealant at various light curing times and two distances compared to a single emission peak LED LCU. Method: Sixty disks of a resin-based pit and fissure seal...