The kinetic of the heterogeneous chemical reaction of aluminum hydroxide and fluosilicic acid was studied. It was found that the diffusion of the reactants through the porous silica coating to the aluminum hydroxide surface and the interfacial chemical reaction between the diffusing reactant and aluminum hydroxide platelets control the overall reaction rate. These two phenomena were studied...

Waterborne coating has recently been paid much attention. However, it cannot be used widely due to its performance limitations. Under the specified conditions of the selected resin, selecting the function pigment is key to improving the anticorrosive properties of the coating. Zinc phosphate is an environmentally protective and efficient anticorrosion pigment. In this work, zinc phosphate was u...

Biomimetic calcium phosphate (CaP) coating has been used successfully for protein delivery, but the release of protein from CaP coating is mainly dependent on the limited dissolution of the CaP coating and the passive diffusion of the protein in the CaP coating. In the present work, our aim is to improve the release behavior of protein from CaP coating and make it more controllable. By using bo...

long–term stability and oxidation resistance of aisi 439 ferritic stainless steel used as interconnects in solid oxide fuel cells can be improved by use of a protective coating. in this study the pack cementation method was employed to coat aisi 439 ferritic stainless steel with manganese. isothermal oxidation was conducted at 800 ºc for 200 hours in static air to investigate the role of coatin...

The use of Fe-Al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. The coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚C in an argon controlled atmosphere. The optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour.&#10The microstructu...

A model of the moisture diffusion in wood under isothermal conditions taking into consideration coating of the surface of a specimen is presented in a 2-D-in-space formulation. A reliability of a corresponding 1-D model is investigated for a simulation of moisture movement in 2-D medium. This paper presents a technique to determine the width as well as the degree of edges coating of the specime...

We present an optimized approach for the deposition of Al2O3 (as a model secondary material) coating into high aspect ratio (≈180) anodic TiO2 nanotube layers using the atomic layer deposition (ALD) process. In order to study the influence of the diffusion of the Al2O3 precursors on the resulting coating thickness, ALD processes with different exposure times (i.e., 0.5, 2, 5, and 10 s) of the t...

In-stent restenosis occurs in coronary arteries after implantation of drug-eluting stents with non-uniform restenosis thickness distribution in the artery cross section. Knowledge of the spatio-temporal drug uptake in the arterial wall is useful for investigating restenosis growth but may often be very expensive/difficult to acquire experimentally. In this study, local delivery of a hydrophobic...