using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. in this work two-dimensional incompressible laminar flow of a nanofluid e...

In this study the effect of magnetic Reynolds number variation on magnetic distribution of natural convection heat transfer in an enclosure is numerically investigated. The geometry is a two dimensional enclosure which the left wall is hot, the right wall is cold and the top and bottom walls are adiabatic. Fluid is molten sodium with Pr=0.01 and natural convection heat transfer for Rayleigh num...

sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. but square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

abstract: in this study, al 2 o 3 /eg and tio 2 /eg nanofluids as coolants have been used in the double-tube heat exchanger. the hot solvent inlet heat exchanger must be cooled down with a specified amount. we can use nanofluids as coolants in the heat exchanger for optimization of the heat transfer area. therefore, the efficacy of nanofluids as coolants is verified. furthermore, flow rate of c...

Experiments were conducted to determine the influence of local vapor quality on local heat transfer coefficient in flow boiling in an array of microchannels. Additionally, the variation of local heat transfer coefficient along the length and width of the microchannel heat sink for given operating conditions was investigated over a range of flow parameters. Each test piece includes a silicon par...

Wind affects adversely the cooling tower thermal performance. A field investigation was carried out to study the thermal performance of Heller cooling towers under wind conditions, involving measurement of wind velocity and its direction around the cooling tower, and obtaining water flow rates and temperatures at the cooling tower inlet and outlet. Results show that air suction at the tower top...

The in-flight ice formation and accretion are highly dependent on weather conditions that essentially affect the heat transfer capability. When the temperature is sufficiently cold, the heat transfer is adequate to remove all of the latent heat from the collected water. The rate of rime ice accretion is controlled by the droplet collection efficiency. Otherwise, when the heat transfer is inadeq...

steady hydromagnetic couette flow of class-ii of a viscous, incompressible and electrically conducting fluid through a porous medium in a rotating system taking hall current into account is investigated. heat transfer characteristics of the fluid flow are considered taking viscous and joule dissipations into account. it is noticed that there exists flow separation at the moving plate in the sec...

Abstract. Natural convection heat transfer in a square cavity induced by heated plate is studied numerically. Top and bottom of the cavity are adiabatic, the two vertical walls of the cavity have constant temperature lower than the plate’s temperature. The flow is assumed to be two-dimensional. The discretized equations were solved by finite difference method using Alternating Direction Implici...

Wellbores in Enhanced Geothermal System extends several kilometers from the ground surface, providing large heat transfer areas between the flowing fluid and the surrounding formations. Various techniques and approximations to model wellbore heat transfer have been presented in the literature. Most of the wellbore simulators assume steady one-dimensional flowing without considering heat transfe...