2 Introduction An important part of any analytical process is sample preparation, which involves isolation and preconcentration of various analytes of interest.1 Liquid–liquid extraction (LLE) is one of the oldest pretreatment procedures and because of its simplicity and low cost is commonly used. However, conventional LLE requires large volumes of high-purity solvents, which are often expensiv...

The application of syringe to syringe dispersive liquid phase microextraction-solidified floating organic drop was extended for the separation and preconcentration of trace amounts of cadmium ions from water and cereal samples. The extracted cadmium was quantified by electrothermal atomic absorption spectrometry. Factors affecting the complex formation as well as microextraction efficiency such...

in this work, an environmentally friendly sample pre-treatment method, ultrasound assisted surfactant enhanced emulsification microextraction (uaseme) followed with spectrofluorimetry was performed for determination of oxadiazon residues in water samples. after the determination of the most suitable extraction solvent and its volume, other parameters such as type and concentration of surfactant...

Vortex-assisted surfactant-enhanced emulsification microextraction based on solidification of floating organic drop (VASEME-SFO) was used for preconcentration and speciation of antimony (ΙΙΙ, V) followed by electrothermal atomic absorption spectrometry (ETAAS). In this procedure, Triton X-114 was used as emulsifier and 1-undecanol was used as extraction solvent. This method is based on the comp...

an efficient, rapid, simple, and highly selective dispersive liquid–liquid microextraction basedon solidification of floating organic drop (dllme-sfod), combined with flame atomicabsorption spectrometry was developed for preconcentration and determination of trace amountsof cobalt in water samples. in this method, an appropriate mixture of acetone and1-undecanol was injected rapidly into the aq...

An efficient, rapid, simple, and highly selective dispersive liquid–liquid microextraction based on solidification of floating organic drop (DLLME-SFOD), combined with flame atomic absorption spectrometry was developed for preconcentration and determination of trace amounts of cobalt in water samples. In this method, an appropriate mixture of acetone and 1-undecanol was injected rapidly into th...

In the present research, salting out and vortex assisted dispersive liquid–liquid microextraction based on solidification of floating organic drop microextraction (SO-VADLLME-SFODME)  for the extraction and determination of phenol and chlorophenols in water samples followed by HPLC have been studied through a novel, simple, low-cost, selectable and environment friendly (so called green) method....

A rapid, simple and cost effective solidified floating organic drop microextraction (SFODME) and flow injection flame atomic absorption spectrometric determination (FI-FAAS) method for copper was developed. In this method, a free microdrop of 1-undecanol containing 1,5-diphenyl carbazide (DPC) as the complexing agent was transferred to the surface of an aqueous sample including Cu(II) ions, whi...