The microstructure and mechanical properties of Zr48Cu48 - x Al4M x (M ≡ Fe or Co, x = 0, 0.5, 1 at.%) metallic glass (MG) composites are highly dependent on the amount of Fe or Co added as microalloying elements in the parent Zr48Cu48Al4 material. Addition of Fe and Co promotes the transformation from austenite to martensite during the course of nanoindentation or compression experiments, resu...

Multifunctional colloidal nanoparticles which exhibit fluorescence, superparamagnetism, and thermosensitivity are produced by two step seed emulsifier-free emulsion polymerization in the presence of oleic acid (OA) and sodium undecylenate (NaUA) modified Fe(3)O(4) nanoparticles. In the first step, St and NIPAM polymerize the NaUA on the surface of Fe(3)O(4) nanoparticles to form Fe(3)O(4)/poly(...

in this study, multi wall carbon nanotubes (mwcnts) were synthesized by chemical vapor deposition (cvd) method using two different catalysts (fe nanoparticles) and (ni nanoparticles) with  two different substrates: quartz and alumina. acetylene gas was used as a carbon source and argon as a carrier gas at different temperatures and different times to study the effects of these parameters on cnt...

Out-of-plane compression tests were conducted on six grades of ultra high molecular weight polyethylene fibre composites (Dyneema) with varying grades of fibre and matrix, ply thickness, and ply stacking sequence. The composites with a [01/901] lay-up had an out-of-plane compressive strength that was dictated by in-plane tensile fibre fracture. By contrast, the out-of-plane compressive strength...

The Photo-Fenton reaction is an advanced technology to eliminate organic pollutants in environmental chemistry. Moreover, the conversion rate of Fe(3+)/Fe(2+) and utilization rate of H2O2 are significant factors in Photo-Fenton reaction. In this work, we reported three dimensional (3D) hierarchical cobalt ferrite/graphene aerogels (CoFe2O4/GAs) composites by the in situ growing CoFe2O4 crystal ...

Considering the wide range of applications of metal–polymer composites, composite of Fe-polyimide has been obtained by plasma sputtering method, also polyimide films were treated with plasma. Comparative study of surface modification of the composite film and the polyimide film due to Fe doping and plasma treatment have been studied, using the contact angle measurement, scanning electron micros...

Graphene-ceria (CeO2G) nanocomposites were prepared by using a low-temperature solution process with different weight percentages of graphene, and their electrochemical properties were investigated. Structural properties of the nanocomposites were studied by X-ray diffraction, Raman spectroscopy, and FTIR spectral analyses. FE-SEM and HRTEM images revealed a "wrinkled paper"-like morphology of ...

In present work 2D FE (finite element) analysis of deformation and damage evolution site in fiber reinforced composites are carried out. The fiber cracking point and stresses is simulated in the fibers/matrix interface, using the ANSYS FE software at varying volume fractions. The effect of matrix cracks and the interface strength on the fiber failure is investigated. Multi-fibre model were used...

The multilayer orthogonal auxetic composites have been previously developed and tested to prove that they own excellent energy absorption and impact protection characteristics in a specific strain range under low-velocity impact. In this study, a three dimensional finite element (FE) model in ANSYS LS-DYNA was established to simulate the mechanical behavior of auxetic composites under low-veloc...

Coand Fe-based alloys produced by powder technology are being widely used as a matrix for diamond-containing composites in cutting, drilling, grinding pplications, etc. The severe service conditions demand that the mechanical and tribological properties of these alloys be improved. Development of metal-matrix composites (MMCs) and alloys reinforced with nanoparticles is a promising way to resol...