نتایج جستجو برای: finite element model updating
تعداد نتایج: 2415272 فیلتر نتایج به سال:
A frequency response function based finite element model updating method is presented and used to perform parameter estimation of the University of Central Florida Grid Benchmark Structure. The proposed method is used to calibrate the initial finite element model using measured frequency response functions from the undamaged, intact structure. Stiffness properties, mass properties, and boundary...
One of the most important items in the field of engineering and design of structures is safety assessment. It is usually complicated, due to uncertainty in determining the most important parameters in the final design. This paper describes a new method for updating stiffness matrix structure that is capable of identifying the damage to individual members, when limited modal data is available by...
The finite-element software framework OpenSees is extended with parameter updating and response sensitivity capabilities to support client applications such as reliability, optimization, and system identification. Using software design patterns, member properties, applied loadings, and nodal coordinates can be identified and repeatedly updated in order to create customized finite-element model ...
Fast Bayesian updating of large-scale finite element models using CMS technique and surrogate models
A Bayesian probabilistic framework for parameter estimation is applied for updating large-order finite element models of structures using response measurements. Fast and accurate component mode synthesis (CMS) techniques are proposed, consistent with the finite element model parameterization, to achieve drastic reductions in computational effort. Further computational savings are achieved by ad...
The modeling of damping is very complex and still considered somewhat an unknown or grey area. Recently, model updating methods has been used to update the damping matrix based on measured dynamic test data to accurately represent energy dissipation mechanism in dynamic systems. Most of the finite element updating methods considers that the dynamic systems are viscous and proportional. In this ...
In this paper, a non-probabilistic method based on fuzzy logic is used to update finite element models (FEMs). Model updating techniques use the measured data to improve the accuracy of numerical models of structures. However, the measured data are contaminated with experimental noise and the models are inaccurate due to randomness in the parameters. This kind of aleatory uncertainty is irreduc...
Finite element model updating of quadratic eigenvalue problems (QEPs) is proposed by Friswell, Inman and Pilkey 1998, to incorporate the measured model data into the finite element model to produce an adjusted finite element model on the damping and stiffness that closely match the experimental modal data. In this paper, we mainly develop an efficient numerical method for the finite element mod...
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید